20 Most Recent
ASUS WL-600g Wireless Router - Page 4 Questions & Answers
Have asus pc notebook laptop windows.
i want to refresh clean slate.all erased .delete all on it now????
all PC's (windows is it????????????????????_)
OS never upgraded.?
HDD never replaced? or upgraded to SSD.?
no recovery DVD or lost it day 1, to now.
no upgrade DVD ?
the manual has chapter called RECOVERY this tells now to reload windows. 1 to 3 ways. and is optional on OS image recovery.
no PC told at all , just ASUS word.
so go to asus.com
find your model # in support
see your support page
read the manual RTM
read chapter "recovery" how to reload windoz
ASUS A300N WIRELESS LAN DRIVER
asus.com
what is a300n?/ a PC ? ahh confused by networking names.
is this a router name and not PC,? routers need zero drivers ever
but PCs do.
sure.
here
go to asus.com
tell them what PC you have
and the driver is there, for sure.
I have asus laptop gl503ge and aura sync is not detecting my keyboard laptop is new
w10 or w11?????????????????????????????????????
the built in keyboard is failing>
or external keyboard of vast types.
a game fails. aura,
so does PC work all by itself and only 1 game on earth fails.
try other games yet,
if only aura fails ask them for support directly or if they support w11 if is w11????????????????????????????????????????????
ask here
https://rog.asus.com/support
Asus Aura Sync is a software that lets you control your PC's RGB lighting
ask them for help, it is all their DESIGN. every inch , mm.
Tablet wont charge
Use a higher amp rated charger, (same voltage and polarity)..but I would suggest letting it complete it's charging cycle before trying to operate it..
Hello, My HDD led is not blinking on my PC but when I connected to my friends PC it worked. The green light is working perfectly when I connect it to the HDD led point it blinks but the red.
Look for the LED pins on your motherboard. One should be labeled HDD+ and one HDD- make sure the cables are plugged into these pins. Doesn't really which color wire to the + or - If it is plugged in the LED on your case could be bad. To test this will need a multimeter. Unplug the HDD cables from the pins. Set the multimeter to measure resistance the horseshoe 1 or 10 Ohms is fine. Stick a probe in each connector if the probes dont fit stick a paper clip in each hold and touch the probe to the paper clips. Dont let the clips touch. If you get no reading then the LED probably burnt out. If the LED tests ok you can leave it unplugged and turn on the computer. Set the multimeter to 10 Volts. Touch the red probe to the HDD+ pin and the black probe to the HDD-. DO NOT TOUCH BOTH PINS WITH ONE PROBE OR YOU WILL SHORT IT. Be careful... If you don't get a reading then there is no voltage making it to the pins.
Not finding what you are looking for?