20 Most Recent Rowenta Commercial Garment Steamer - White - Page 6 Questions & Answers

try white viniger in the water resevoir might help clear hard water clogging

you have a blockage its not getting the water when you first turn it on its using the water that got by you will have to dig deeper in to it you can ether try disassembling your self or send it out for repair this is common after they sit in the closed position the hose gets hard and wont open

hope this helps you
bob

The Rowenta Commercial Garment Steamer has brass jets on the head stick, with a pin or a needle into them which twisting while pushing in and out, some times these jet block up, so check it whether those jets are blocked. you may need some help from a tech person to unblock them, also check the hose, sometimes it was a bad chip in the hose.

try using CLR in it or use white vinegar or even coffe pot cleaner

check if there is a water on the right level check the heater if ok and the thermostat.

sounds like thermostat problem...

Having the same issue, if you have found a solution short of buying a new one, please share it...I am thinking surely there is a reset button but have not found it yet.

Unlock the tank, turn upside down and you'll find the fill cap. Remove, fill and recap.

Vinegar is great for any mineral deposits for coffee pots and irons.

This is a very simple device, very few things to go off inside it - either the wiring got loose or a part failed.
In your case you must open it and check that the steam generator is still operational: remove the top cover (held in place by some screws at the bottom and , using a multimeter, check the only 2 parts - that the thermostat transmits the power to the resistor and that the resistor is intact(not interrupted) .
If you don't know how to do that or a part has failed then your only option to fix it is to take it to a repair shop - parts aren't sold directly to customers. If you live far away from a shop then make a call to the closest one and ask for a quote, you might fin out that it will be cheaper just to buy a new one.

No, it's best to use distilled water.

Hi,
Have you tried calling Rowenta customer care service centre,
Because they don't sell their Steamer parts online.

You can get it only in their customer service center.Please specify the region and choose your place.

http://www.rowenta.com/

Note:They don't sell it through any dealers.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Don't know this machine but if it has brass jets on the head stick a pin or a needle into them twisting while pushing in and out, some times these jet block up. other wise undo hose and blow through it hope I have helped in some way.