Question edited for clarity and better written English.
Yes it seems to be a very good buy. Just go to the Amazon page and read the reviews.
https://www.google.com/search?q=HAPPRUN+Projector
Probably worth paying the extra $10 for the upgraded version $109.99.
..
Most likely a fuse. Check for a fuse on the inverter itself or one inline with the plug. Usually you can screw off the tip of the plug and replace the fuse inside.
If your NSM Performer Classic jukebox is not accepting money and playing music, there could be a few different issues that could be causing this problem. Here are a few things you can try:
Check the coin mechanism: Make sure the coin mechanism is clean and in good working order, and that the coin chute is not blocked.
Check the bill acceptor: Make sure the bill acceptor is clean and in good working order, and that the bill path is not blocked.
Check the credit display: Make sure the credit display is working properly and that it is displaying the correct amount of credits.
Check the software: Make sure the software on the jukebox is up to date and that there are no errors.
Check the selection buttons: Make sure the selection buttons are working properly and that the jukebox is able to receive selection inputs
Check the amplifier and speaker: Make sure the amplifier and speaker are working properly and that the jukebox is producing sound.
If none of these steps resolves the issue, it is possible that the jukebox may be defective and require repair or replacement. In that case, contact NSM customer support for further assistance.
To delete all data from your Sony Ericsson X10i, you can perform a factory reset. Here are the steps to do this:
On the home screen, tap the "Menu" button.
Scroll down and tap "Settings."
Scroll down and tap "Privacy."
Tap "Factory data reset."
Tap "Reset phone."
Confirm that you want to delete all data by tapping "Erase everything."
Please note that this will permanently delete all data, including contacts, messages, apps, and settings. It's also a good idea to back up your data before performing a factory reset.
If your Sky Plus box is not allowing you to record one channel while watching another and is displaying a "no signal" error, there could be a few potential causes for this issue:
Insufficient signal strength: Make sure that your Sky Plus box is connected to the satellite dish correctly and that the dish is pointing in the correct direction. Weak signal strength can prevent the box from tuning in to channels properly.
Dish misalignment: If your dish is not properly aligned, it may not be able to pick up a signal from the satellite. You can try adjusting the dish yourself or contact a professional to align it for you.
Technical problem with the box: There may be a technical problem with your Sky Plus box that is preventing it from recording and watching different channels at the same time. This can be caused by a hardware malfunction or a software issue.
Subscription issue: Make sure you have the appropriate subscription package that allows you to record and watch different channels at the same time.
Box is full: If your hard disk is full, the sky+ box may not be able to record or watch another channel.
It would be best to check all the above points, if the problem persists, contact Sky customer service for further assistance.
Why is my Sky saying no signal on some channels?
Faulty Satellite Cable
There are all sorts of things that can cause a cable to become faulty like age, condition, and whether it's damaged and weathering/ water ingress. To fix- A new coaxial cable or two new coaxial cables may need to be installed for Sky+ boxes and Sky Q boxes.
A hard drive crash on a Tascam DP-02 digital recorder can be a major issue, as it can result in the loss of recorded audio files and settings. Here are a few potential solutions below:
Check the connections: Make sure that the hard drive is securely connected to the Tascam DP-02. If the connections are loose, the hard drive may not be recognized by the device.
Reformat the hard drive: If the hard drive is still recognized by the Tascam DP-02, you may be able to reformat it and use it again. This will erase all data on the hard drive, so make sure to back up any important audio files before reformatting.
Replace the hard drive: If the hard drive is not recognized by the Tascam DP-02 or reformatting does not work, you may need to replace the hard drive. You can use a compatible hard drive with the same capacity or larger.
Seek professional help: If none of the above solutions work, it may be best to take your Tascam DP-02 to a professional technician who can diagnose and repair the issue.
It is important to keep in mind that, regardless of the solution, you will lose the audio files and settings that were stored on the hard drive. Backing up your files regularly is crucial to avoid data loss.
reset my Tascam DP o2 - You May Try onces.
To perform a factory initialization of the DP-02 turn the unit off. Hold the Up Arrow and Track Edit while powering the recorder on. You'll get a confirmation screen and then press the Yes/Enter button.
The fuse needs to be replaced then because it has blown on you or it might also be the fact that it was stopped working on you guys and you will need to buy a new one.Or it could be the plug or the power cord.
If you are experiencing a "Display Power Not found" error on your KEB F5 Inverter and the DC bus voltage is coming and the control card is functioning properly, there may be an issue with the display or the power supply. Here are a few steps you can try to troubleshoot the issue:
Check the power supply for any visible signs of damage or malfunction.
Check the display for any visible signs of damage or malfunction, such as cracks or loose connections.
Check the wiring and connections to ensure that they are secure and properly connected.
Check the F5 Inverter's fuse and circuit breaker to ensure that they are functioning properly.
Try resetting the F5 Inverter by unplugging it and waiting a few minutes before plugging it back in.
If these steps do not resolve the issue, it's best to contact a professional repair service or the manufacturer for further assistance. They will be able to diagnose the problem and recommend the appropriate repairs. It's also a good idea to stop using the F5 Inverter until the issue has been resolved, as continuing to use it may cause further damage.
If input A is not working on your hybrid b1200 when in stereo mode and input B is working as if the mode is in parallel, it's possible that there is an issue with the wiring or connections for input A. Here are a few steps you can try to troubleshoot the issue:
Check the wiring and connections for input A to ensure that they are secure and properly connected.
Check the b1200's fuse and circuit breaker to ensure that they are functioning properly.
Try resetting the b1200 by unplugging it and waiting a few minutes before plugging it back in.
Check the owner's manual for any troubleshooting tips or information on common issues.
If these steps do not resolve the issue, it's best to contact a professional repair service or the manufacturer for further assistance. They will be able to diagnose the problem and recommend the appropriate repairs. It's also a good idea to stop using the b1200 until the issue has been resolved, as continuing to use it may cause further damage.