20 Most Recent ASUS Eee 4G Notebook - Page 9 Questions & Answers

If you are using windows XP , vista or windows 7 here is what to do . 1. Open your control panel and click on users and accounts. 2.click on the account you want to put a password on. 3.click on ''create a password''. 4.type in your password.

You can remove or change the Window's User or administrator's password. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

take this software its best of best 3dp chip download from Google and then it will run and install your drivers ,Please reply me back for any more qurries

Go into the BIOS Setup (press F2 when the screen lites up).
Right arrow key to Advanced
Down Arrow key to Onboard Devices Configuration
Enter
Arrow key down to Onboard Camera
Enter
Arrow key to Enable
Enter key
F10
Enter

Hopefully that takes care of it. :)

Discharge and charge againe battery few times, then try to test it with Battery Eater for example, looks like it is bad elements in this battery.

Press Shift + Numlock key. This will turn off the Fn key and the Fn key will only work when it is pressed, like it is supposed to.

Please rate, thanks!

Try this procedure: http://en.kioskea.net/faq/4162-restore-an-asus-netbook-to-factory-settings

More info needed, can't quite make out you mean? If I understant you your OS is Windows XP Home Prem.:http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/#specifications

you cant take the password off but you can log yourself in automatically so it doesnt ask for your password. basically just go on settings and then personalization and then log me in automatically. and that should solve the problem

The computer or an application? If it is an application, you should run an antivirus scan. Also, make sure you have updated Windows and your drivers by running Windows Update and going to Asus' website to download drivers. You may need to wipe the disk and reinstall Windows, if nothing else works. If all else fails, contact Asus customer service as you may have a faulty piece of hardware in your computer.

You can remove or change the Window's User or administrator's password. You need access to a computer with Internet access to download the Hiren's Boot CD and burn it onto a CD. Then insert this CD into the laptop/computer and boot up the laptop/computer with the Hiren's CD and follow the instructions. There are very useful utilities CD and it a Linux boot CD which contains quite a lot of Utility programs including a password removal program. Click on one of these links to download HIREN'S BOOTCD :- http://www.hirensbootcd.net/ http://67.20.82.163/

go to your control panel look for display then web cam and enable

just go to network settings in control panel, and right click my network icon and go to properties point to static option and input ip as required.

Click the "Start" button and open the "Control Panel."

Select "Clock, Language, and Region."

Select "Region and Language."

Select the "Keyboards and Languages" tab.

Click your desired language from the "Display language" list.

Click "OK" to confirm the language choice.

hope this helps

if you dont have the driver you will need to download one here are a few you could try http://www.filebuzz.com/findsoftware/Universal_Software_For_All_Webcams/1.html http://www.filebuzz.com/findsoftware/Webcam_Driver_For_All_Webcams/1.html http://www.filebuzz.com/fileinfo/49356/SplitCamVideo_Virtual_Driver.html http://download.cnet.com/splitcam/3000-2348_4-10500269.html http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name driver you might have to try a few times to get it right hope this helps

your laptop is sending video through the hdmi/sata instead of to your laptop screen. Usually when you unplug the hdmi cable it will automatically revert. You have 2 options. One you can hook back up to your tv and use that as a monitor to go into your display settings and reset your laptop screen as the default. Second, you can start up the computer in safe mode and then change the display settings back to the laptop screen as the default. If you get into safe mode and you still dont see anything then the problem is most likely your laptop screen itself has gone and this is all just one big coincidence.

actually you can replace the NTLDR file with a new one,but it's dificult,has many risks,and there will be many bugs after you do thatand i've never repair it that way,always faili suggest you to reinstall your operating system

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer you could select the option start at last known configuration that worked this will tell you if and what file has been corrupted or missing then you will know if its a hardware issue and work your way through the problem if the problem still persists f8 back into safe mode you might need to select your operating system to load into safe mode you might use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work Manual restore points that you specify with the System Configuration utility Installation restore points that occur before you install a program or a service you can use the system checkpoints or the installation restore points to restore your computer's settings to a date when it operated correctly. This may also help determine the cause of the configuration error.To perform a system restore, follow these steps:

1.Click Start, click Run, type msconfig, and then click OK.

2.On the General tab, click Launch System Restore.

3.Select Restore my computer to an earlier time, and then click Next.

4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information.

5.Select a system checkpoint or an installation restore point, and then click Next.

6.Close all other programs.

7.To start the system restore, click Next.

8.Your computer restarts. Repeat steps 1 through 8 until you fix your configuration issue.

hope this helps