20 Most Recent
Canon PIXMA MX310 All-In-One Printer - Page 2 Questions & Answers
What is error code 300 for Canon MX310
Error Code 300 is displayed.
1) Cause : The machine not ready.
Action : Confirm that the power lamp is green.
If the power lamp is off, turn the machine on.
While the power lamp is flashing green, the machine is initializing. Wait until the power lamp stops flashing and remains green.
If the Alarm lamp is orange, an error may have occured on the machine.
2) Cause : Machine is not connected properly.
Action : Make sure that the USB cable is securely plugged into the machine and the computer.
* if you are using a relay device such as USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing start normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
* There could be a problem with the USB cable. Replace the USB cable and try printing again.
3) Cause : Your machine is not selected in Printer on the Print dialog box.
Action : Select your machine's name in the printer on the Print dialog box.
If your machine name doesnot appear in Printer, follow the procedurebelow to check that the driver for your machine is installed on your computer.
a) Select Print & Fax Preferences in Printer.
In Mac OS X. v.10.2.8 or 190.3.x, select Edit Printer List in Printer.
b) Check that your machine's name is displayed in the list of printers and that the check is selected.
In Mac OS.X v.10.2.8, check that your machine;s name is displayed in printer list.
c) If your machine's name is not displayed, click Add(+) to add the machine. If you cannot add the machine, follow the procedure described in youe setup sheet to reinstall the MP drivers.
CANON PIXMA MX310 error 6000 - What does this mean
hi..
Error 6000 is a service call error, meaning that the printer needs to
be taken into a canon authorized service facility for repair.
This is a line feed error, with the problem originating from the timing disk film or the printer's logic board..
thank u
rate me!!
Canon Printer MX310: I get an -30 error code;
- Click Start and then click Printers and Faxes to open the Printers folder.
- If the desired printer icon is missing, please go to Step two.
- Make sure the desired printer has a check mark next to it which indicates it is set as the default printer.
- If the desired printer does not have a check mark next to it, right-click the printer icon and then click "Set as Default Printer".
- Right-click the printer icon, and then click Print Test Page to print a Windows self-test page.
- If the Windows test page prints successfully, close all windows and try printing from the application you were using before.
- If the Windows test-page does not print, go to Step two.
- Step two: Re-install the USB Composite Device from Device Manager
aFor more help visit
cbrtechsolutions
Canon MX310 paper jam
"Gclanton" had it right.
I had the same problem today. I ended up taking a piece of paper and from the back side started lightly forcing the paper in the back slot. I had the top cover open where you replace the ink cartridges. Towards the back you can see the paper start coming into the printer next to some rollers. On mine there was a small black switch about an inch from the right in the middle of the plastic piece above the rollers. Once I started pushing this paper in I could see this switch was stuck in the down position. After several minutes of pushing the paper in and out the switch moved up and out of the paper path. I then pulled out the paper and hit the ok button and it came on line. This may work better with a piece of card stock.
That switch is the issue. I ended up finding an object lodged against the switch. Needed a flashlight, plastic giftcard and a tweezers to get it out. Works great now.
Action to fix Error Code 6A00
Hi
Error 6A00
The 6A00 is a Canon generic code for paper path jam.
Solution 1:
Move the printhead carriage back and forth a few times.
Solution 2:
Check the purge unit: Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like.
Solution 3:
Press the ink pads down in the purge unit.
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Ink refill for MX 310
Hi. That kind of software is almost impossible to get. Search in youtube there are a lot of tutorials about that toic
Reset Canon MX310
- Sometimes there are other problems by some model printers, buy new cartridges if its needed there is an reset by software and hardware. chipproblem on the cartridge by oxyd, then sometimes it could help to clean the brass contacts on the cartridge . to be sure thats not the fault.
- reset canon mx310 Google Search
Just replaced ink cartridge and still says cjeck
did you get a brand name canon pg40 or pg 50 ink cartridge, i replaced the one at works black cartridge with an eco refilled cartridge and it still showed up empty even though i know it wasn't. its canons way of making sure you buy canon. there are ways around it though. hit menu navigate to "rx settings" hit okay then hit okay on "autoprint rx" make sure it is set to on and hit okay, then make sure "print when no ink" is also set to on and hit okay again. it will now automatically print even if the machine thinks there is little or no ink. cheaper knock off cartridges here we come!
Ink asorber full
Hey welcome to Fixya.
If the waste ink absorber is full, you need to reset it.
First of all to solve it you need to download PCM Service tool. Download it from Here
After downloading follow these instructions
Step 1: Enter in service mode in order to used the re setter:
- Turn off the printer without pulling the power cords.
- Hold down Resume button and press Power button
- Keep holding down Power button and let Resume button go
- Then Press Resume button 5 times then let both buttons go
- The Alternate Blinking error is gone, the printer is in Service Mode state
Step 2:
- Extract the PCM servive tool resetter and then double click "servicetool.exe"
- Click Reload Button and you will get a new USB port.
- Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
- Then press "EEPROM" button and the printer will print some text, after that click OK
- Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.
- You have done.
I hope this solution will helpful for you
Please
don't forget to click on Four thumbs which are given below & then
write testimonial in your words for appreciation if it is helpful
THANKS & Keep Using fixya
Where can I get a USB cord?
USB cords can be found at Radio Shack, Target, Best Buy and Wal-Mart stores.
If none of these stores are in your area, look for one at any place that sells computers or
printers.
I hope you find the one that is right for your printer.
Not finding what you are looking for?