20 Most Recent
LG WM2455 Front Load Washer - Page 5 Questions & Answers
Lg washer wm2455h leaking from bottom filter
Make sure the drain hose is not plugged by lowering the end below any water in the machine--it should flow out freely. If ok, look carefully at the filter housing for any warping or cracking of the plastic lid or case. Make sure the clamp fits tightly. If water does not flow from the drain hose properly, try 'back-washing' the filter element--you may have to replace it if you have difficulty.
LOUD!!! Spin cycle
Whats even more mundane ,this plays havoc on the electronics and specifically the expensive control board.Opt for extended warranty coverages!
It will not drain or spin
Hi. this is a failed timer device. simply replacing the timer control module will eliminate these issues you are having.
rate me
Machine doesnt start. the wash and spin indicator lights blink alternating
first try unplugging and waiting a minute and then plug in and see if that resets it. if it does not try unplugging, wait a minute, hold power button in for 15 secs and then plug back in and see if that resets it. and finally, try the second one and continue to hold power button in while plugging back in. all are different ways of resetting some washer models. one might work for you and cannot hurt to try. good luck
LG Fuzzy Logic 8.2 kg top louder WF-8071TTP
This dE error or fault code to indicate that the door is not latching properly. Check the lid or door operation to be sure it's not binding and that the door alignment is correct. Also, check the door/lid hinges to be sure they're not binding. Finally, make sure the door catch is in place and not broken. You may need to replace the door hook/catch or the door lock assembly.
LG error code
its best to get an engineer to the problem as it could be anything at all or just an alignment problem eric
Not finding what you are looking for?