20 Most Recent
Whirlpool Ultimate Care II LSQ9564J Top Load Washer - Page 5 Questions & Answers
Dirt in water
AT LEAST YEARLY YOU HAVE TO CLEAN YOUR MACHINE, WITH CHEMICAL LIQUID,, YOU CAN USED BOREX TO CLEAN YOUR MACHINE,,,
1/20/2014 6:15:15 PM •
Whirlpool...
•
Answered
on Jan 20, 2014
Water is coming out the bottom and not in to the loader
your fill hose is separated at the solenoid or you have a broken hose. Have someone look under the unit and see where the water is coming from. If there isn't a floor panel on the unit, pull it away from the wall and tilt it back so you can see the action underneath the unit. Start the cycle and see where the water is coming from. Stop the cycle and fix the leak.
1/8/2014 9:28:52 PM •
Whirlpool...
•
Answered
on Jan 08, 2014
Leaky washer
Janet I am VERY SURPRISED at this Whirlpool would do this...Shame on it! LOL. OK, Enough goofing around! Da Problem is Z in the Tub! It can be the following 1) Tub Seal (Most common) 2) Pump not draining (Second Most) 3) Washer exterior Drain to house. I forgot to mention this Is Very Common!. Janet these are the Easy fixes. The hard ones involve the tub being cracked (OMG!) or hose connections are cracked to/from washer and interior. Using the Wrong Soap! I know it is a reach but I have to mention it. If it is not the tub seal or the tub. You Gotta problem and you have to weigh the age of your washer vs purchasing a New one. If it is less than a yr old the Manufacture will take care of it. If you call Sears, plan on at least around $130+Parts. That may Pay for itself cause the person repairing it will guarantee the work. Good luck If you need further help, reach me via phone at
https://www.6ya.com/expert/steven_b77d19396bfe2249
12/27/2013 6:26:07 AM •
Whirlpool...
•
Answered
on Dec 27, 2013
Not finding what you are looking for?