Dometic 3313192.000 White Single Zone LCD Thermostat Heat/Cool/Fan - Answered Questions & Fixed issues
How to wire six wire to three wire termenal
I'm pretty sure this thermostat uses digital communications with a dometic control board. In other words, there are no contacts in the digital thermostat to turn something on and off. Even if you ran a 12VDC wire to the thermostat for power, it won't work to replace a "real" thermostat. I bought one to replace my old analog thermostat and it's not going to work for me.
12/2/2016 5:29:57 PM •
Dometic...
•
Answered
on Dec 02, 2016
•
593 views
Heat wont turn on
thermostat, relay module,heat strip, fusible link.
8/18/2015 4:49:49 PM •
Dometic...
•
Answered
on Aug 18, 2015
•
175 views
What is a E4 code mean
Error Code:E1 Loss of communication between the Single Zone LCD thermostat and the mod-ule board. LCD will cycle between E1 and the previous mode setting. System will shut down.E2 Open circuit or out of range Indoor Temperature Sensor. Heating and cooling operation will be locked out. Fan operation can continue to operate.E3 Shorted Indoor Temperature Sensor. Heating and cooling operation will be locked out. Fan operation can continue to operate.E4 Open circuit or out of range Outdoor Temperature Sensor (select models). Heat Pump operation will be locked out. Air Conditioner, Fan and Furnace operation can continue to operate.E5 Open circuit or out of range Freeze Sensor. Air conditioner mode of operation will be locked out. Furnace, heat strip, heat pump and fan mode of operation can continue to operate but displays the last temperature set-poi
1/28/2013 2:47:50 PM •
Dometic...
•
Answered
on Jan 28, 2013
•
1,452 views
Not finding what you are looking for?