Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker - Page 4 - Answered Questions & Fixed issues
How do get the freezer slider door out
first shut off water to it then unplug it till it warms up enough to melt the ice that's got it stuck shut be prepaired to clean up a mess it has happened to me
Where does evaporation water collect?
Defrost water goes into the drain-pan below the refrigerator and utilizes the air that goes across the condenser coils to EVAPORATE into the air. There is no collection of water :-)
Where do I put cold cuts and meats I don't want to freeze?
Best place for cold cut meats is the bottom drawer in the refrigerator. It's also good for cheeses. That drawer is the coolest but not freeze place. The upper two drawer are good for veggies and fruits. We put the lever controls in the middle selection for them.
Samsung refrigerator ice maker
Many icemakers use a bar or a sensor to shut off water when ice levels are at a maximum. Check to see if it's bent, missing, or pushed down below the ice level, tricking it into thinking there's no ice there.
How to change light bulb in Kenmore refrigerator serial no. 4A31214613 ?
Open freezer and reach to the back of the plastic cover over the light. You'll feel a gap in the back center of the cover. Gently pull forward and the cover will drop down and pull to the back to fully remove it. Once you've removed the cover you can unscrew the bulb, which you can use to make sure you purchase one like it and most hardware stores, such as Ace or Home Depot. Reverse the removal instructions to install light and cover. Light should turn on once you've screwed it in.
7/23/2014 2:02:51 PM •
Kenmore Elite...
•
Answered
on Jul 23, 2014
•
3,946 views
Adora freezer on the bottom not making ice
It could be a couple of things. Check to see if the bar that controls turning the ice maker on and off is in the down position. Up is off. My ice makes water line froze in the refrigerator section; no ice and no clod water. Check to see if the cold water is working in the refrigerator section. If not, turn the refrigerator section temperature to 42, keep the door open until it drops to that temp, and wait 24 hours for the water line to thaw. The water and ice maker should start working.
Why is my kenmore elite bottom freezer not freezing?
Not knowing how old the unit is, may be a problem to answer.
You may have a fan out or it may need a good defrost.
Remove and items from the freezer and fresh food section and alow to sit un pluged from power for 24 hours. ( Doors open )
Can I fix refrigerator that no longer defrosts?
maybe it some sort of losing your freon you may need to refill it again but first do this //
1. check the bottom of your fridge, there is an air intake grill at the bottom, make sure this is clean and free of lint/ dust
2. make sure the thermostat inside is set properly
3. don't overload the freezer section. the cold air for the fridge comes from the freezer, and if you have too much stuff in the freezer, it will stop the air from being able to flow to the refrigerator section
4. Finally, if you're a little bit technically capable, check the back of the refrigerator, for a small 1/8" hose going down the back of it- make sure this line is clear and free of gunk
My refrigerator temperature isn't working
My Kenmore refrigerator was 14+ years old. It had been slowly losing feon for sometime. When I called a repair man to check it over and possibly recharge it, his response was considering the age of the unit, don't waste the money on repair but buy a new one. That's what I did and am now saving about $20.00/month in energy costs.
Enmore refrigerator model 795.71013.010 ice maker
michael masters is not giving you the proper info. i realize this is from a few years ago but i have to call out a dumb comment when i see it. he told you how to check a whirlpool ice make rand not an lg style ice maker. that you have with an 795 source refrigerator. sorry the he gave you the wrong info. if after 4 years you are still needing help, please respond and i will help you.
Light stays on
Check the door frame for a protruding small lever that gets pushed down when the door closes. If one is visible, that should be the light switch, which probably went bad and needs to be replaced. Without a model # hard to say how the light are set to go off, but most use the above method, hope this helps.
Not finding what you are looking for?