how do i change the lcd on the n95, as a good member told me when i asked him the question, how do i fix my phone when the screen doesnt light up, he replied that i should change the lcd , how do i do this ?
plz i really need all the help i can get, thank you for reading
Here is a video which explains how to replace the screen, pretty clear.
Hope this helps
Posted on May 10, 2008
I have bought a chinese mobile recently and I cannot operate my self in the absence of the above software MT6225 can somebody help me out to get the above software
Sajeewa
[email protected]
hERE is the PC Suite for chinese mobile MT6225
http://www.infinity-box.biz:80/download/public/Mediatek_Handset_Manager.rar
**************************************************************************************************************
Download USB modem driver & PC Sync Manager for MT6227 from:
http://mt6227-driver.blogspot.com/ [ scroll down to find the link for download]
Posted on Oct 13, 2008
Hai dear i have one china Mobile model capitelp606. If i connect the phone to computer my system asks me to install the driver for Mt6225 so that what can i do for that please help me
Hi
I HAVE A CHINA HANDSET, WHEN I CONNECT MY PHONE N78 IT KEEPS TELLING ME TO INSTALL MT6225 , CAN U EMAIL IT TO ME :
[email protected]
Posted on Oct 20, 2008
hi please help with unlocking my n95 8b, on (3G uk), so i can use my t mob sim on it, asked 3g , they said i have to waite 18 months till my contract ends,been to many shops their prices are steeeeeeeeeeeeep, help please ,
You can unlock it, but your contract will not go away. If you signed on the dotted line for 18 months or whatever, then that is when the contract will end.
Type *#06# to displays the International Mobile Equipment Identity (IMEI) number, that's the number required to unlock your phone. However your service provider could BLOCK it permanently.
Posted on Feb 27, 2008
no tools for application settings, infrared and radio tools. USB were not detected by the computer.
Were can i get the Nokia PC Suite 6.85 for N95? because my N95 china phone can't connect to my pc. the error is MT6227. Can you help me to this problem??? pls reply to me thanks
Posted on May 03, 2008
Hi
I have a nokia n95 8gb mobile,im wanting to do a master reset ive tried codes that i have found on internet etc but none seem to be any good.i just need to return the phones menu etc the same as when i purchased it.
Also does a master reset wipe off music,photos etc
Thanks
robert
Try this. Turn off your phone, then turn it back.
While its turning press and hold the following buttons:
Call, 3, *
This should be a hard reset button that will restore your n95 to its original settings.
Posted on Mar 17, 2008
Hi ive tried basicall everything. deleted everything from the phone and even restored factory setting but it still says memory full. Any ideas on how to fix this?
Hi there:
For months I've been searching on the Internet looking for a solution to my problem for my Nokia N95
It kept on saying that my phone memory was low and every time i deleted stuff (Including apps) the memory kept on eating away at its self with none of the memory that was there nowehere to be seen.
Save all your contacts and stuff you cherish on ur phone memory before u do this !!!!!!!!!!!!!!!!
I tried the factory reset ( *#7370# ) and the software reset ( *#7780# ) entered the code "12345" after each one and they both reset.... entered my country, date, time etc.... but it never sorted out my memory problems
Another reset is the 3 button reset... this worked on my phone and thank F**k it has :-)
what you do is switch off your n95 turn it back on but keep ur fingers pressed on the:
The star button ( * )
The number three button ( 3 )
And the Green button ( one you start to make phone call with )
did the same with the country date time and brill 140 Mb's free memory yee haaaaaaaaa
Posted on Mar 25, 2009
Please advise how to format phone memory of Nokia N95
There are 3 methods to format the phone
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IMPORTANT: back up your phone and memory card first!
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
First: if the phone menus work there is a; go to menu -> tools -> settings -> general -> factory restore.
note: the defualt code is 12345
Seconed method requires you to enter these into the dial number area.
Nokia Code : *#7370# : NOKIA Format phone (Soft Reset)
Nokia Code : *#7780# : NOKIA Factory Reset (Hard Reset)
Found these in the N95USERS fourm.
Note: the defualt code is 12345
Third: is a button combination the needs to be done during the phone powering on
Hold down. 3, * and Green Call button
While holding this combination press the power button once to start the phone
Note: this does not require any codes; if this works the phone will prompt you to be set up again
None of these methods format the memory card
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
IMPORTANT: back up your phone and memory card first!
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
There are two methods to format the memory card
First: Go to menu -> tools -> utillites -> memory -> options -> format mass storage
Seconed: Connect your phone to your PC via the supplied USB cable.
Then select Mass Storage mode on the phone.
Once you PC has installed the Mass Storage device you can format the card from My Computer.
Note: assuming Microsoft Windows XP or VISTA.
Billman87
Posted on Jan 04, 2009
Hi there ... I'm wondering if you can please help me ... I've switched on an old mobile phone that I haven't used for several months. It asked for a PIN which I had forgotten and after three unsuccessful guesses it asked for the PUK code ... I have no idea what that is ... are you able to please assist?
Thanks ~ Shelley/
Hi everyone
Every PUK code is unique so nobody can tell you your PUK number, but i will tell you what you can do!
1)
If you still have your packet that your Sim Card came in, you should
find your PUK number in there, if you don't have the packet, please
read bellow.
2) You must get a phone that is on the same network
as your phone and call the networks Customer Care and ask them for your
PUK number, they will ask you for your phone number, then they will
tell you your PUK number. Once you have done this, you will be able to
reset your Pin number so you will be able to go into your phone again.
Please also remember to give me a good rating on my profile.
Kind regards
Dustin Ellse
Posted on Jun 26, 2008
I am using China made N95 Mobile but i don't know its phone lock code. Can anyone help me out. If possible provide any link or post it the help of china mobiles.
The default should be 12345 for the phone security code.
Posted on Feb 29, 2008
4,224 questions posted
Usually answered in minutes!
4,425 Questions
4,285 Questions
2,139 Questions
687 Questions
376 Questions