Canon PIXMA MP600 all-In-One InkJet Printer - Answered Questions & Fixed issues
How do I connect canon mp600 to wifi?
According to the quick setup manual, this printer supports only bluetooth. In other words it is not a wifi printer. In order for you to be able to print on it with a wifi device like a tablet, you will need first to connect your printer with a usb cable to a computer that is connected to your wireless network and then you will need to share the printer on the local network. During the installation process to the connected computer, you should be asked wether you want to share it or not with the network. Simply answer "yes"
6/4/2020 8:28:51 AM •
Canon PIXMA...
•
Answered
on Jun 04, 2020
•
1,173 views
U043
The U043 error code indicates that an ink tank is not installed. One or more ink tank icons on the LCD should also be lit up. The lit up icon indicates the applicable ink tank. Verify these tanks are indeed fully seated in the print head and that they are lit up red.
You can also press the OK button to clear this message and continue.
1/8/2020 8:43:14 AM •
Canon PIXMA...
•
Answered
on Jan 08, 2020
•
1,326 views
Canon MP600 Printer - How do I fix error code 5100
Hi Whitey621
Error code 5100 Try
Solution 1:
Look inside for a tiny object like a piece of paper, a staple...
Solution 2:
There is a thin plastic strip running across the width in front of and below the drive belt: there are fine black vertical lines on this strip. If the strip gets a piece of crud on it, you get an error during the start-up sequence.
Gently clean this strip with a damp lint-free tissue
Hope It Helps: Pineworks.
9/12/2019 9:05:15 AM •
Canon PIXMA...
•
Answered
on Sep 12, 2019
•
1,199 views
Print without colour ink
The manufacturers removed the option long time ago due to the printheads and muzzles which get screwed up while printing with one or more empty cartridges. here are some explanations and tutorials on how to actually print with an empty cartridge:
How to print without black ink
9/5/2018 3:56:29 AM •
Canon PIXMA...
•
Answered
on Sep 05, 2018
•
125 views
Canon MP620 printer does not work with wireless
Hi, Be sure to check the printer settings to make sure the wifi option is selected on the printer itself. Once wifi is turned on reboot your computer. It should find it then. Check back if that doesn't solve it and together we can continue the troubleshooting.
1/23/2018 12:01:57 AM •
Canon PIXMA...
•
Answered
on Jan 23, 2018
•
465 views
I have the below mentioned printer a
Hi Peter.
- Turn off the machine and unplug the power cord from power supply
- Plug the machine back in and turn the power on
NOTE- If you disconnect the power plug, all the faxes stored in the machine's memory will be deleted
If the error message is still showing, then it is necessary to deliver or send the printer to an authorised repair centre. I am assuming it has run out of warranty, so any repairs will cost you.
You can find the details of your nearest repair centre using this link
interactive repair centre locator.
Also It may be worth checking the roller bar and rollers to ensure they are running at the same speed when flipping the paper over.
Regards
David
12/3/2017 12:08:30 PM •
Canon PIXMA...
•
Answered
on Dec 03, 2017
•
51 views
Canon MP 600 printer is dead
Unplug the printer.
Restore power.
Hold down the power button for an unreasonably long time until it boots into maintenance mode.
Follow the prompts.
If nothing comes up call Canon.
9/2/2017 9:07:44 PM •
Canon PIXMA...
•
Answered
on Sep 02, 2017
•
255 views
Canon MP600 printer, error msg. U052
Cleaning the
Description
Reseat the Print Head to resolve the U051 / U052 error.
Solution
Errors displayed on the printer's LCD screen:
- U051 Print head is not installed. Install the print head.
- U052 The type of print head is incorrect. Install the correct print head.
Reseat the Print Head:
- Make sure that the power is turned on, and open the Paper Output Tray gently
- Lift the Scanning Unit (Cover), then hold it open with the Scanning Unit Support (A). (The print head will move to the replacement position.)
- Remove all the Ink Tanks in the following manner.
- Push the tab (B) and lift the ink tank to remove.
- Do not touch the Print Head Lock Lever (C) while removing the ink tanks.
- Once the ink tanks have been removed, raise the print head lock lever.
- Tilt the print head slightly towards the front of the machine and lift out gently.
Caution: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply ports <3>. Doing so may cause printing problems.
*Before proceeding to next step, check the carriage area for packing material, torn paper, etc. and remove if found
- Tilt the Print Head and set it in place. Lower the Print Head Lock Lever (E) completely.
- Insert ink tanks into the print head.
- Insert the front end of ink tank into the Print Head at a slant.
Make sure that the position of the ink tank matches the label.
- Press the mark (Push) on the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up red.
- Lift the Scanning Unit (Cover) slightly to set the Scanning Unit Support back to its original position, and gently close the Scanning Unit (Cover).
Caution: When closing the scanning unit (printer cover), be careful not to jam fingers.
Note: When the next printing begins, the print head cleaning will begin automatically.
If you have reseated the ink tanks and print head and the error still appears, our industry-leading support team is available to help you Monday through Friday from 10 AM to 10PM EST. You can contact our technical support experts by phone or email:
Call 1-800-OK-CANON (1-800-652-2666)
5/6/2017 4:38:08 AM •
Canon PIXMA...
•
Answered
on May 06, 2017
•
366 views
MP600 thinks direct print port has incompatible device
Hi! As a first course of action, please unplug the printer from power source and long press the power button for like 10secs. Plug the printer from power source then press the power button and see what happens. If no luck, you may need to update the printer's firmware by downloading from the web. Just type your printer model and add firmware. Hope this helps and have a good one!
8/28/2016 5:12:49 AM •
Canon PIXMA...
•
Answered
on Aug 28, 2016
•
1,153 views
Not finding what you are looking for?