20 Most Recent Bosch Nexxt 500 WFMC3301 Front Load Washer - Page 3 Questions & Answers

I had a similar problem, after ruling out the following kink in drainage hose no blocking of filter drainage pump ok ok we eventually found out it was the heater, sounds strange I know as you would not necessarily relate the heater to mid cycle stop an drainage problem....but it sorted ours ours hope this might help help regards R

Could be control panel issues or main board problem

I'm really not sure about this machine BUT try unplugging it and see if that resets it.

You have a bad water supply valve which is struck in the on position-this valve is mounted inside the machine right where you attach the supply hoses-cheers Denny