20 Most Recent Whirlpool GC5SHEXNS Side by Side Refrigerator - Page 2 Questions & Answers

Go to page 5 of your user manual HEREStyle 1: The dispenser light can be turned on by pressing the ON

button.

Style 2: When you use the dispenser, the lever will automatically

turn the light on. If you want the light to be on continuously, you

may choose either ON or NIGHT LIGHT.

ON: Press the LIGHT button to turn the dispenser light on.

NIGHT LIGHT: Press the LIGHT button a second time to select

the Night Light. The dispenser light will automatically adjust to

become brighter as the room brightens, dimmer as the room

darkens.

OFF: Press the LIGHT button a third time to turn the dispenser

light off.

The dispenser lights are LEDs which should not need to be

changed. If it appears that your dispenser lights are not working,

check to be sure that the light sensor is not blocked (in Night Light mode). See "Troubleshooting" for more information.I am here if you need help, Sea Breeze Parts Manual

Pull out the fridge and unplug. Remove the back cover. Clean the condenser coils and fan. If they're difficult to get to, use compressed air to blow out. (you can get a can from walmart). That should fix the problem. If that doesn't work, then write back.
Doug

that is normal as this is where the hot freon flows through,if everything is ok as in temps and defrost your ok

no water comeing to ice maker gold series

Hello,

When you cleaned the coil underneath did ya notice that their was air being blown out their by a fan,having clened the coil was a good start but if the fan by the compressor isn't running that divider between the ref/freezer will be hotter than normal( its normally warm and thats ok),so check that the condenser fan is running and that it seems to running at a good speed.


GENE

Ok
Most refrigerators have resistance heaters around the door seals to keep down condensate and "sweating "during the summer. Check your model to see if there is a manual moisture control switch inside.You would then be able to turn them off in winter.If there is no switch, then the fridge automatically sets the heaters and you're good to go.

hope this helped

What you are hearing is the fresh food damper. It sounds like it stuck open or stripped. You should have a tech look at it. It could stick closed and make the fresh food section too warm. Ihope this helps.

Hi,

Here is a tip that I wrote about refrigerators and the fan noise that they develop sometimes...

Refrigerator Fan Noise

heatman101

only light i could find is the filter light . and the main light 40 w appl globe the control does not use a light . the main light reflects in the control panel to give back light . the filter light is for filter only . and is out if filter is ok .. .hope this helps mm

Hi,

Many times a freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong.

If you are hearing a clicking or buzzing then check out the last two tips.If your refrigerator is running but warm, then...Check out these tips that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...Refrigerator Condenser Coil Cleaning Refrigerator RepairRefrigerator Troubleshooting Refrigerator CompressorRefrigerator Compressor Start Capacitor and Start Relay

Refrigerator or Freezer not Cooling or Getting Coldheatman101

Wobbly door handles are the result of loosened screws / bolts. ON side x sides, there is usually trim above and below the door handles that can be slid off away from the handles to expose these screws.

Hi!!
The filter status light will help you know when to change your water filter. The light will flash and change from green to yellow. This tells you that it is almost time to change the filter. It is recommended that you replace the filter when the status light changes to red OR water flow to your water dispenser or ice maker decreases noticeably. After changing the filter, reset the filter status light by pressing the button. The status light will change from red to green when the system is reset.
1. Press the eject button to release the filter from the base grille. 2. Pull the filter straight out. 3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter. 4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place. NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place. 5. Remove the protective covers from the O-rings. Be sure the O-rings are still in place after the covers are removed. 6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.
Good Luck!!
A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

may be air and will cure itself