20 Most Recent Cuisinart CBK-200 Bread Maker - Page 4 Questions & Answers

http://www.cuisinart.ca/pdf/ibs/en/CBK-200C_en.pdf Pages 20-36

Your pan is held in by two spring clips, one on each side of the pan. They are under tension in order to hold the pan steady while the mixing occurs. Lift the lid all they way open and grab the metal handle on the bread pan with both hands. "pop" the pan by lifting straight up with a little ****. That will cause the clips to lose their grip and your machine will kind of "pop" out. When you are ready to bake bread you may have to "pop" it back into place. Remember that.

In fact go ahead and practice popping your pan in and out so you get confident with how the little spring clips work.....so you will be ready next time you are ready to bake bread in it....Best wishes!

You may want to try making a 1.0 or 1.5 pound loaf instead of the full size 2.0 loaf to put less of a load on your machine. In exchange for this answer please consider reading and reviewin my novella on Amazon. Just go to amazon and type in my full name in the search bar and the book will pop up. My full name is Daryl Wayland Nash.....Thanks!

The basic program is the white bread recipe. Program #1 on most machines. In exchange for this answer please go to Amazon and consider the purchase of my novella "Lived" Just go to Amazon and type my full name in the Amazon search bar and my book will pop up. My full name is ...Daryl Wayland Nash Thanks and happy baking!

Your drive belt is probably broken or has slipped off. Unplug your machine and turn it on its side (remove the pan and paddle first) and remove the bottom panel with a screwdriver. Most bread machines have a removable panel. Hopefully yours is one of those. You will then be able to see if the belt is broken or has slipped off. You can reach me at breadmachineshelp.com for reinstall or replacement of your belt. If your belt has a number code on it I will need that. It will look something like this: STS 60 S3M471 If it has no code on it I still may be able to figure out the belt you need. Again, reach me at my website: breadmachineshelp.com

Your drive belt is probably broken or has slipped off. unplug your machine and turn it on its side (remove the pan and paddle first) and remove the bottom panel with a screwdriver. You will then be able to see if the belt is broken or has slipped off. You can reach me at breadmachineshelp.com for reinstall or replacement of your belt.

Forget the white bread recipe in the Cuisinart book. There is an error in it. Is that the one you were trying to bake?

Many bread machines pre-heat on the whole wheat cycle. Give it up to 30 minutes and it should start mixing within that time frame.

That's a troubleshooting code listed in the manual. It means something is broken and you should take it to a service center for repair.

Call or e-mail the company or the manufactor and see what they say.

press tv and menu..or the service provider button and menu