20 Most Recent KitchenAid KSB560 5 Speed Blender - Page 5 Questions & Answers

You need to ask a proper question. Repair what exactly??

No reset button, unplug it, remove the base and check the motor for continuity. If motor is open circuit check the individual field windings, there is a fuse on one if them under the insulation under the one with the metal clip around it. You can replace the fuse or bypass it. It is tricky and not for someone with no electrical clues.

The motor will probably be open circuit, take it back under guarantee and let them sort it out. If you mess around you will void your guarantee.

Motor open circuit most likely. Check the field coils for continuity if one is open it is possible a fuse in the field has failed. It is a job for someone with electrical knowledge.

Coupling teeth??? Replace coupling, if the teeth on the blade part of the coupling are also damaged then you will need to replace the blade assy as well as that coupling only comes with the blades.

Good question bro, hope this answer helps.

http://www.amazon.com/KitchenAid-9704230-Blender-Coupling/dp/B000V6ZEZ4

Buy a new glass part then, you do not repair broken glass.

What model

http://www.appliancepartspros.com/search.aspx?model=ksb50b3

The clutches are replaceable. Locate a local service agent and either get them to fit it or buy one and fit it yourself. Here in NZ they come with instructions in the bag.

Buy a new one from K/A

No the big one is not the blender.

Colin if another K/A model jar would fit K/A would know and should have told you.

Undo the 4 screws underneath, remove top drive first.

If you have no electrical ability best take it to "the man" Solution is only going to be found by opening it up and testing circuits.

If you have no electrical ability best take it to "the man" Solution is only going to be found by opening it up and testing circuits.

If you have the glass jar then purchase either a new rubber seal for the blade to jar fitment or replace the blade assembly, it will be one or the other. If you have plastic beaker then get a new beaker, it is sold as a single assembly.