20 Most Recent Cuisinart ICE-45 1.5 Quart Ice Cream Maker Questions & Answers

There IS a silicon ring that fits in a groove on the bottom of the freezing bowl. I lost the one on mine, which causes the leaking described. I replaced it with a silicon O-ring (1" inner diameter, 1 1/4" outer diameter, ring thickness 1/8") that I found on Amazon - did have to buy a set with lots of different sizes but now I have extras in case I lose it again. Works perfectly without leaking.

Check that all gears are in good working order. The paddlewill not turn properly and the motor will not run if the gears are worn ordamaged gears. Inspect the paddle for damage and replace if necessary. You alsomay need to replace worn or damaged gears in the motor. Lubricate the motor,drive shaft and motor bearings. Hope this will help you. Good Luck.

http://www.cuisinart.com/products/ice_cream/ice-45.html

Click on "Download Manual"

Your freezer is not cold enough. I had a heck of a time with this machine the first few attempts, when I was in storing it in my main freezer (less cold than the one in my garage). Then i froze the bowl in my garage freezer - it is set to below 32 degrees Farenheit and is designed for long-term storage (gives anything I put in it major freezer burn). When the freezer is set to a low enough temperature, you will find that even 14 minutes is plenty of time to acheive the desired ice cream consistency in the ICE-45 (without having to pre-chill the ingredients).

Other things to check:
Make sure you are using heavy whipping cream and not half-and-half or other substitute.
Make sure that you wait until you are ready to pour the ingredients into the bowl BEFORE taking the bowl out of the freezer.

Here is the official manual from Cuisinart's website:
http://www.cuisinart.com/share/pdf/manuals/ice-45.pdf

You should be able to download the manual from the manufacturers web site.

Make sure the bowl and mixing paddle are in correct place, and that lid is locked into place. Turn dial to on and try again. If this fails to resolve, replace it -has a 3 year warranty.

You can buy the part from Cuisinart here:
http://www.cuisinart.com/parts_accessories/parts.php?product_id=434&item_id=529&cat_id=10

Good Luck.

Your washing machine turned into an Ice Cream Maker! Try a Power Reset. Sometimes it is as easy as disconnecting from the mains supply for 5 minutes and plugging back in. Some models use a number of keys, press and hold. Google make model reset gives this

Frozen Yogurt-Sorbet & Ice Cream Maker - Cuisinart

https://www.cuisinart.ca > en_CA > ICE-30WNC_en PDF To reset the unit, turn the ON/OFF switch to the OFF position. Let the unit cool off. After a few minutes, you may turn the unit on again and continue making ... It may be that the sound sender device is faulty, or even a main control board issue. No one else has encountered your issue. https://www.google.com/search?q=Cuisinart+ice+cream+doesn%27t+beep ..

The bearing or bush of the motor would be faulty. try to put some oil on the shaft. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Additives and air. Gums, emulsifiers and stabilizers are commonly added to commercial ice cream, and generally there is more air whipped into the commercial ice cream during freezing in the manufacturing process.

Yes it will

https://www.cuisinart.com/share/pdf/manuals/ice-30bc.pdf 5 may be an S in model number. 30BC is the same device as the CIM-60SA https://www.cuisinart.com/share/pdf/manuals/ice-30bc.pdf

First you can not run this machine on 220 Volts, it probably burnt up the motor and every thing else on it. The only way you can use a 110 volt unit on 220 is to buy a step down trans former and install it which will take the 220 down to 110.

Read all about it here: http://icecreamscience.com/cuisinart-ice-30-ice-cream-maker-review/

I had one do that and I opened the gear box and found that the last time we made ice cream & it started getting hard the motor caused the gear to pop a tooth off (plastic). so now you hear the motor running but no transmission. Take it apart and check or turn the ice cream tub connection socket 1/4 turn and see if that makes a difference.