20 Most Recent Bosch Nexxt 100 Series WFMC1001UC Front Load Washer - Page 3 Questions & Answers

Check connectors on motor assembly they can become loose due to the high speed and vibration. Motor and drum are tied together. I had similiar problem with mine after spending a few hundred on a control board which made no difference.

Bosch Nexxt 100... | Answered on Jun 18, 2014

Almost certainly it's the fuseable link in the rear of the dryer. It's about a $15 part, and very easy to check and change. If you take the rear cover off its a small white part with two wits of the same color connected to it, and it's on the blower housing. It should have continuity if you check it. Make sure that you disconnect one of the series to get an accurate reading of continuity. If it doesn't have continuity, it needs to be replaced.

I’m happy to assist further over the phone at https://www.6ya.com/expert/thomas_d43b1a2c941966d4

Bosch Nexxt 100... | Answered on Jun 17, 2014

Brand new belt and no other symptoms; my bet is the motor brushes. You will have to remove the motor to check this. there are 2 holders for the spring-loaded brush. I am guessing they are worn down and just stopped touching. It's a "silent failure" with no real symptoms except is doesn't move.

Bosch Nexxt 100... | Answered on May 28, 2014

Check plugs on motor assembly

Bosch Nexxt 100... | Answered on May 04, 2014

Not sure if this will work with this model but try this:

1-Turn off and unplug the machine. Plug the washer back in and wait for the control panel to light up. This resets the washer back to the original factory settings.
2-Unlock the control panel by simultaneously pushing and holding down the Options and Select button for 10 seconds if you see a lock icon on the control display.
3-Push whichever new options you need, and wait for the control panel to flash and reset the washer's options.

Bosch Nexxt 100... | Answered on Apr 22, 2014

Are there any lights on at the washer? If not check the washer circuit breaker in your house main circuit breaker/service panel. If it is tripped reset it and try start button again. If it trips again you need a service call. If there are lights on try turning the washer main knob to off and unplug the washer from the wall outlet...wait 10 seconds then plug in and try start button again.

Bosch Nexxt 100... | Answered on Apr 05, 2014

Okay if the drum inside is Plastic then YES, You can get a sealant to block off holes ,depending on how big the rip is,I wish you joy and if there is any thing else I can do or Advise then please ask.

Bosch Nexxt 100... | Answered on Mar 05, 2014

Not finding what you are looking for?
Bosch Nexxt 100 Series WFMC1001UC Front Load Washer Logo

398 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts


Level 3 Expert

85222 Answers


Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

e3 error code bosch washing machine

  • Washing Machines