20 Most Recent
Irwin SDS-Plus Hammer Drill Bit 6in.L, 3/8" dia., ModelNo. 322024 - Page 8 Questions & Answers
Value of Champion machine tools heavy duty drill press, 5 speeds-model#F001,capacity-chuck 5/8th" spindal JT #3 serial#103447
There are a great many similar items on the market these days at a variety of prices and in spite of the claims very few are truly heavy duty - most are copies of copies from a few manufacturers (usually China) and are label engineered and best suited to the home workshop and occasional user.
A true heavy duty version is very different - very much heavier and with a rack-and-pinion operated tiltable table, a more powerful continuous rated motor and many refinements that suits the machine to continuous workshop use. Such a machine as this would usually cost at least double and most commonly three, four or five times of the common imported type.
The first type has little value as a used machine other than what cash a purchaser can be persuaded to pay for it, in fact if it is bought with the usual accessories; a set of T bolts, a good machine vice and a collection of Morse taper drill bits, the price would more than double, the accessories being worth more than the pillar drill.
The industrial rated tool in good condition does retain a good used value but again it is worth only what the market will pay.
I suggest you peruse a variety of tool catalogues.
10/27/2019 6:29:13 PM •
Drills
•
Answered
on Oct 27, 2019
Got 2 6095d drills. 1 has retaining screw,1 appears not.is possible? Re removing chuck
Usually drill motors have a reverse (left) thread retaining screw located in the center of the chuck. The chuck however is typically threaded in the normal right hand configuration. Once the retaining screw is removed place a 1/4" allen wrench short end into the chuck and tighten, next strike the allen wrench with a soft tip mallot (counter clockwise while holding on to the drill motor firmly. This should loosen the chuck, then simply unscrew the chuck by hand. Good Luck!
10/26/2019 3:04:17 AM •
Drills
•
Answered
on Oct 26, 2019
Whats the best grease for gears in electric drill?
The best grease to use in all applications is Lithium based MOLY grease... it IS Superior to any other greases which are made from clay or soap... So, This grease will make anything it is used in, to work & lubricate Better....
10/23/2019 1:00:32 PM •
Drills
•
Answered
on Oct 23, 2019
I know lithium ion and nicad batteries for my tools have different charger..
How do i know if my motorcycle can charge a lithium battery??
i have a 2014 yamaha stryker
Short answer, yes. Longer answer, maybe maybe not. IF the Lithium Ion battery is fully charged when you install it, the bike should be able to keep it fully charged. Lithium Ion batteries do not tend to lose their charge rapidly just sitting there with nothing on. It takes a special charger to charge them to begin with. Colder days, you need to "wake up" the batter with a couple hits of the starter or turning the headlight on, automatic with the key on most bikes. They simply won't give full power until you "wake them up". I am assuming you are talking about a replacement motorcycle battery, not some random lithium battery in this case. One problem is the lithium is much more expensive than the lead acid battery, and if you let the voltage fall to even relatively high levels (sometimes as much as 11 volts) it can ruin the battery totally. Lead acid can be much more forgiving. Leave your key on with a lithium, you could kill it beyond recharging. Lead acid batteries this is not the case, and lead acid batteries can be refreshed with fresh acid, once a lithium is gone, it's gone, there's no saving it. I would rethink why you want a lithium battery. It does save weight and often size, but I see no real advantages over the standard battery in use.
10/1/2019 1:02:41 PM •
Drills
•
Answered
on Oct 01, 2019
Regis cordless drill not working?
Battery flat.?
Dirty or corroded battery/drill contacts.?
Bad connection in the internal switch or wiring.?
Motor brushes worn out.?
9/16/2019 12:37:47 AM •
Drills
•
Answered
on Sep 16, 2019
Not finding what you are looking for?