Sentry Fireproof Safe - Answered Questions & Fixed issues
Sentry Model 1610 Won't Open
Hello,
I am a Safe Specialist i have been reading some of your problems and this should help there is no code if you have lost yours only the default code for the model 1610 the default code is: 77,22,09,11,64 try that if you havent changed it and with this problem with people not getting the handle open with the green light happening i suspect this is a issue with the lock mechanism i have had many of the same problems with people bringing them in when you get you safe open it and where the lock is put some lubricate on the lock regulary as the lock sticks and wont open if you havent done this then you cannot get it open see you local safe specialist and tell them what i have said and they may or may not be able to get your safe open i hope this has helped Rob Safe Specialist World.
I changed the batteries in
Try the factory code shown at the front of your manual. You can find the a user manual on the Sentry website.
What is the
sentry 6380
I have cracked many codes by just feel and using the lever to feel the drop! The first right turn after three complete revolutions of the dial has one long pause and the rest short! After the long pause is the first in the combination, the left one same thing after one complete revolution, then right again pulling the lever down every drop meticulously. DONE!
How to open Sentry V330 with combination and key?
3 Digit Combination Lock
31-10-31
- NOTE: If your safe DOES NOT have a key, skip Step 3.
- Turn the dial to zero.
- Insert your key and turn it until the plunger pops out.
- Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
- Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
- Turn the dial to the left to the last number (stop the first time on your last number).
- Pull the handle down; the door should open.
If this still does not open the safe, refer to the following page for additional different types of Sentry Safe models:
http://www.sentrysafeshop.com/kb_results.asp?ID=15
Know combination, but every time I enter it, why is there an error light?
If you repeatedly get an error code when entering your combination I would first ask if your batteries recently went all the way dead ? If yes then possible that the data for your combination was lost. In your user manual for your safe is a factory code for your safe. If you did not change your factory code when you set up your safe then this will work to get you into your safe. If you did change the factory code and do mot have that number either then the only way to get into your safe is to contact Sentry Safe customer ssrvice. They will be able to take care of you but it is a process.
I have sentry safe that i bought with keys need reset combo
If there is a reset combination it's unlikely anyone is going to tell you otherwise you would have free access to any other locked Sentry safe. A locksmith who deals with the brand or Sentry themselves will probably be able to do it for you if it's possible.
Not finding what you are looking for?