20 Most Recent Intel D945GCCR Motherboard Questions & Answers

you will need to open up your network connections click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark you will need to update or install the driver or it could be firewalled If you are trying to connect through a modem/router the driver should have come with a disc provided by your ISP internet service provider or your motherboard disc you might have to connect the usb lead to your modem to get a connection then click start control panel administrive tools computer management device manager scroll to network adapters should see a yellow question mark? right click install drivers if you cant find the driver hopefully one of these will help you http://download.cnet.com/%7Bvalue=http://www.download.com/802-11b-g-atheros/3000-2112_4-162108.html

http://alpha.majorgeeks.com/Intel_Network_Adapter_Driver_for_Windows_7_d6273.html

http://majorgeeks.com/SiS191_Gigabit_LAN_&_SiS190_LAN_Driver_d5923.html

http://majorgeeks.com/IntelR_PROWireless_LAN_2100_Network_Connection_d4598.html Latest

http://majorgeeks.com/downloadget.php?id=5240&file=15&evp=5fbb1c6e47482358c61a5236fb38a112 VIA LAN Driver. If you don

Hi,
Appki operating system select karke apna sound driver download kar lena.

Yaha Per Click Kijiye

Thanks

Thank you

Either the cable is defective (it has a break inside it so try another one) or the onboard LAN chip was fried by the power surge generated by a lightning strike that came in your vicinity.
That is unfixable, disable the onboard one from the BIOS and install a simple PCI LAN card in its place.

http://www.manualslib.com/manual/440611/Intel-D945gccr.html A MANUAL.

Doesn't matter if you have an Intel Pentium D processor.

What does matter is what Southbridge chip is on the motherboard. It handles the audio (Integrated Audio) of the motherboard.

If this motherboard is an Intel D945GCCR model, here is the driver download page from Intel Support,

Intel has an automatic update and detect drivers feature.
I would suggest using it.

(The digital signature has been verified, so click on RUN.

I would have clicked on RUN anyway. It is INTEL, sheesh!)

Would also like you to read Troubleshooting audio issues,

http://www.intel.com/support/motherboards/desktop/sb/CS-020642.htm

For additional questions please post in a Comment.

Regards,
joecoolvette

[ Southbridge Chip:

The Southbridge chip is part of the motherboard chipset.
The Northbridge chip, and the Southbridge chip.

{Does not apply to motherboards supporting Intel Core i3, i5, i7, and i9 processors. Different technology is used }

The Northbridge chip was so aptly named because if a motherboard were a map, the Northbridge chip would be setting to the 'North'.
{It's located immediately south of the Processor, under an aluminum heatsink}

The Northbridge handles the faster capabilities of the computer.
The Processor, Ram Memory, and High-speed graphics.

High-speed graphics being AGP, or PCI-Express.
A graphics card inserted into a white PCI slot, or Integrated Graphics on the motherboard, is Not high-speed graphics.

The Southbridge chip handles the slower capabilities of the computer.
Audio falls into this category.

Motherboard Diagram. (The technology shown fits the Intel D945GCCR motherboard)

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

More information on the Northbridge chip. (And Southbridge. Click on the blue southbridge in the first sentence )

http://en.wikipedia.org/wiki/Northbridge_%28computing%29

The Intel D945GGCR motherboard uses a;

A) Intel 945GC Express chipset GMCH for the Northbridge chip.

(Intel 82945GC. There is an aluminum finned heatsink sitting on top of this chipset.
Looks like a meat tenderizer.
If it wasn't you would see Intel i945GC - 82945GC )

B) Intel 82801GB for the Southbridge chip.

(ICH7 - 82801GB. This part number you can see. No heatsink)

C) RealTek ALC883 audio

http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=44

More information on the Intel 945GC chipset,

http://en.wikipedia.org/wiki/List_of_intel_chipsets#Core_2_chipsets

Under the Chipset heading look down to 945GC, then read across.
Now you know what;

Processors are supported
Ram Memory is supported
Graphics are supported

Check memery

If I understand what you are asking: The computer starts up and you see the setup page. It then says that you are supposed to place the jumper in the normal position. It happens every time.

If this is correct, it is telling you that there is a jumper on the motherboard (probably labeled "clear CMOS) and it's set in the incorrect position. There will be three pins. The jumper is installed across two of them. Move the jumper (the little plastic thing) to the other setting: for example, if it's installed on pins 1 and 2, move it to 2 and 3. Give that a try. Will probably work for you.

Sorry, the motherboard has been fried - nothing you can do, it's dead. Replace it.

go here under download software http://www.intel.com/p/en_US/support/highlights/dsktpboards/d945gccr

http://www.intel.com/p/en_US/support/highlights/dsktpboards/d945gccr

here you go https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+945+Express+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D945GCCR&ProdId=2766&LineId=2424&FamilyId=36

go to intel then support then download bio

www.intel.com/...port/highlights/dsktpboards/d945gccr this link will show you d950

http://www.intel.com/support/motherboards/desktop/d945gccr/sb/CS-026626.htm FIND THIS.

intel d945gccr supports ddr2 400 mhz & 533 mhz it maximum support ram is 2gb

You sound much more adept to answering the problem yourself. I doubt anybody on these boards will be able to help you with your problem at that level.

Best of luck!

web site of intel then support then discontu.board then hit d945gcc then download bios you sould download all updates as will

Normally, blinking indicator lights and no display on the monitor indicating a wrong resolution or refresh rate frequency, that the monitor can not display it.
To fix, enter safe mode, and configure the display to the lowest resolution. After restart, you should be able to have the display.

u dont need a driver if u r using windows 7 or 8check intel.com support or go to realtek's website u will get ur driver