Top 20 Kodak EASYSHARE 5300 All-In-One InkJet Printer - Page 6 Questions & Answers

Move the images directly to the PC.

Hi..

Try here
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport

and selecting the second option "installing new printhead".

Good Luck:-)

Give more info.

Go to control pane and select Add/Remove 9xp) or Uninstall a program(vista,7) and select it.

Go to Kodak Help Center,
if you need more help, post back or thumbs back.

Hi,

You can download the installation software from manufacturer's website by clicking this link

Hope this solves your problem. Thanks for using FixYa.

Hi,

Try to check with Kodak Support to see if you can get another replacement.

Phone:800-235-6325
How to reach a live person: Press 1 for English and then press #

check the print head. Mine went out after about 9 mon. they sent a replacement and the prob solved. good luck

It sounds like the ink carriage has indeed failed. Is there any chance you think it may be under warranty still? This is definitely a physical failure on the part of the printer. If you happened to purchase the device with a major credit card (not a debit card) there is a good chance it may still be under the free extended warranty most credit cards place on electronics. Please contact your credit card company to inquire if they do this, and they will be able to file the claim and get you a refund for the printer.

Otherwise though you are going to want to replace it unfortunately. I can definitely recommend a good replacement if you want.

Thanks
Tim

There must be a printer setup button. Browse thru and will find clean cartridge menu. run it few times might solve your problem. I have not seen the printer but some brother printers have this option i have used to solve similar kind of problems

Have you tried adjusting the resolution? Usually this can be fixed by setting a heavier resolution.

Sure I do! You can find your printer software at Kodak's website. Find "downloads" and click on it. Then enter your printer name and model number and choose your operating system and follow the prompts from that point and your good to go!

Hi


To resolve this issue you'll need to clean your printers cartridges. To clean it you'll need Q-Tip and alcohol. Turn off your printer and unplug it, now open the printer's front cover and take out the cartridges from their respective carriage. Now dip the Q-tip in alcohol and clean the cartridges with Q-tip. Also, clean the print head with Q-tip, use a paper towel if there is excessive ink inside the carriage.

Now let it dry and check if it is still giving similar issue. If yes then closely examine the print head for any kind of restiction like a piece of paper.

Daniel Scott

here is a link for your printer driver. Click it, choose your operating system, select the file and click download.

http://www.kodak.com/global/mul/service/downloads/...

Good luck.
Please give some good ratings too. Thank your for using Fixya.

plz check the manufacture website for drivers

try to remove both cartridges and put them back in. make same print. if of no use, run a Clean Printhead in your men. If still of no use, then printhead needs a replacement

Have you tried to clean the printheads. the software should allow you to do this or try to do it thru the menu on the printer. do it several time to clean the heads

Hi
Most likely the print heads are clogged.The old ink sets up and dries out over time and lack of use.The link is to a how-to article on an easy way of cleaning the heads.
If this helps,would you rate my post?
Thanks
Bob
http://www.atlascopy.com/newsletters/How_To_Clean_Clogged_Inkjet_Print_Heads.htm

Hi. There are lot of way on how to transfer your documents from old compter to nerw computer. First, you may use extarnal harddrive and copy all the documents from old PC to external HD and copy it to new PC. Second, If computers are in a network you may access the old computer from the network using the new computer and copy the files. Third, you may burn all the files from the old computer and then copy it from the new computer. Fourth, you may also do direct cable (LAN) connection to copy files from your old computer.

hi
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

click on the link above and that should give you a downloaded version of the instructions on how to do this

CLICK HERE
this link if you click on it will take you to kodak's site and then you can download a pdf version of the instructions direct form kodak.

let me know if you have any problems with the links ok