20 Most Recent Kodak EASYSHARE 5300 All-In-One InkJet Printer - Page 2 Questions & Answers


turn off the printer
unplug the power chord at the back of the printer
wait for 5-10 sec.
replug power chord
turn on the printer

Kodak EASYSHARE... | Answered on Sep 21, 2015


This one pops up a lot when the printhead sensor gets dirty. I would pull the paper out, give the inside a good blast of canned air, pull the cartridges and then reload it like you're setting it up again the first time: paper, ink, test print. If you still get the error code try cleaning it again but on its side or back and check the print head belt and rail, too.

Kodak EASYSHARE... | Answered on Apr 13, 2015


Try Using An HP Color Inkjet Printer With Only 2 Cartridges,
One Color One Black That Works! If You Don't Have One Buy One New or Used It Does not Matter HP Is The Best!

the one you have Is Defective Anyway And Needs To Be Replaced!

Kodak EASYSHARE... | Answered on Jan 13, 2015


Did I mention it sounds like the scanning assembly is locked in place for travel and needs unlocking?

Kodak EASYSHARE... | Answered on Aug 04, 2014


Replace Printer With A Hewlet Packard Color Inkjet Printer!
HP Printers Are The Best! Trust Me Im A Technician!

Kodak EASYSHARE... | Answered on Jul 26, 2014


There is a known problem with premature failure of the printhead. I called Kodak support at 1-800-421-6699. They will go through a short procedure with you, and then should offer to replace the print head free of charge. After I called (no wait, and an native English speaking operator), I received the replacement in two days.

Kodak EASYSHARE... | Answered on Jun 14, 2014


corrupt software. delete printer,restart computer,re-install software.you prob have a virus.

Kodak EASYSHARE... | Answered on Jun 13, 2014


Run a printhead cleaning if Black is faded or missing.
If no improvement, replace Black ink cartridge.

Kodak EASYSHARE... | Answered on Jun 02, 2014


http://resources.kodak.com/support/pdf/en/manuals/AiOPrinters/1K2682_SetupBooklet_5300_AMERICAS_WEB.pdf
Seeing as the problem is with your computer and NOT your printer it would be helpfull to know what OS you're using.
Go to printers and devices. Remove ALL the printers you don't have and all the Kodak printers you do have.
Load the Kodak install CD and follow the directions.

Kodak EASYSHARE... | Answered on May 03, 2014


I needed to reload my AiO Home Center software and no one seemed to have the correct procedure. Maybe if you remove & reinstall yours it will resolve your problem. This procedure worked for me on my XP-machine:
1. got to Control Panel/Printers&Faxes and delete the printer
2. go to your Hardware/Device Manager/Universal Serial Bus Controllers, right-click on USB Composite Device and select Uninstall
3. go to Control Panel/Add/Remove Software and remove the EasyShare software
4. disconnect the cables from the Printer
5. download from Kodak.com the program "install_aio.exe"; run the program
(I selected only AiO+EasyShare+Software Updater to load)
6. followed the prompts after the sw installed to reconnect the Printer cables
7. rebooted

WORKED for ME !

Kodak EASYSHARE... | Answered on Apr 11, 2014

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

1,204 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EasyShare Kodak

  • EasyShare Kodak

Most Popular Question

kodak printhead question

  • Office Equipment & Supplies
Loading...