Kodak EASYSHARE 5100 All-In-One Printer - Answered Questions & Fixed issues
Not printing microsoft office documents, VIsta Software
Try to press the photo and copy at the same time it will print a diagnostic page
look how is the quality of the text.
if it prints very light or if it doesnt print open the access door and try to remove the ink cartridges and put it back again and make sure you hear a click sound after you put the cartridges back in and close the printer access door
try to print again a demo page press photo and copy and check if there is improvement
if no improvement open the kodak aio home center software click on the question mark(?) on the upper right corner and click on maintenance..then select printhead cleaning.After the printhead cleaning print again demo page (press photo and copy at the same time) if still no improvement on the quality of the text call the kodak hotline 1 800 421 6699..you might need a printhead replacement..
How do you enlarge a picture? I recieved no
you can pull the copy from the folder location and use "paint" that comes with your operating system and enlarge the photo there
2. if you have photo software you can use it to enlarge the photo to the desired page you want. This is software such as Photo smart etc.
3. In Windows 7 there is a "Window Picture Manger" that will re size your photo also if you have this operating system. It is listed under "Pictures" click here then you will come to "windows Picture viewer" then at the top of the window you will see "File,Print,Email,Burn and Open.
4. By clicking on the "Open" caption you will see a drop down menu with "paint,Gallery, etc. choose the "Windows Picture Manager" and you will have a "helps " menu to the upper right hand corner click here to see how to operate the picture manager.
Kodak Printer
Kodak Technical Support Number: 1-800-421-6699
I hope I'm was of help. Take care.
Pages come out of printer blank
It’s making te noise of printing or just get the paper and got it out fast ? If goes straight out is the driver if goes line by line and is blank the cartridges are dryed or the injector are clogged with old ink. Time to buy a new one or send it to maintenance
My Kodak 5100 Easyshare printer will not scan or copy
Call the Kodak customer service number and tell them that you need a new printhead, that's the device that your cartridges fit into. They know that they have a problem but they will ask you to print a test sheet anyway. They should ship you a new printhead within about five days - at no cost. The printhead only seems to last about 4-6 months with my occasional use. Tell them that they should replace the ink cartridges since you used probably used up the ones in the printer trying to do the diagnostics of cleaning the printhead. They may not replace the cartridges but we should give them a hard time since it's their problem.
Not recognizing new ink cartridge
We had the same problem from the 1st day! Finally I took out the cartridges, rapped them smartly a time or two, said four letter words at them and replaced them. They now show up as full and the blinky red lights went away. Don't know how long this will last...
Printer does not print in color but only prints in
Run a "print-head-cleaning-cycle" -- the ink inside the cartridges is not getting through the ink-jets, and is not reaching the paper.
Either that, or the electronics inside the ink-jets are malfunctioning, i.e., not telling the ink-jets to shoot the ink out.
Black ink will not print text
maybe the ink jet cartridge is depleted. This is common on all ink jet printers.
Or, the ink jet cartridge has tape on the head.
Not finding what you are looking for?