20 Most Recent
LG 42LC2D 42 in. LCD HDTV - Page 6 Questions & Answers
Invalid format when conected to laptop
Go into your control panel.
Select display.
There will be a picture showing 2 screens.
Select the 2nd screen, and lower resolution to it's minimum.
Apply and test.
Slowly increase till you find what your happiest with.
Worked for me using a ASUS laptop and LG60'plasma.
With set up box audio in to tv causes high pitch sound
I am assuming this should read 'Set top box'. What kind of cable are you using?
Usually the set top box connects via a SCART lead but yours may be HDMI if it is a very new set top box.
If you are using RCA plugs, you may have cross connected the wrong cables. The RCA cables should be colour-coded. RED and WHITE are for audio, Yellow is for video.
Best advice is to switch it all off, remove all the cables you attached, and start again. The instruction manual/user guide usually has an illustration to help you identify what your set up looks like - there are usually several examples.
If the cables you need did not come with the set top box, you will need to purchase them.
When you are connecting audio leads, you should use the 'audio out' on the set top box and the 'audio in' on your TV set.
It would help to know the EXACT model number of LG screen you have and the make and EXACT model number of the set top box.
Good luck.
I have sound no picture on 42LA45H replaced slave and master boards sill no pic
Hi Stacy,
I appreciate your DIY effort. But there are certain conditions for a good Inverter board to work. A good Inverter board will not work if it does not get power from power supply board and certain other commands like "Inverter on" and "brightness control" from the main board. All these things are printed near the connector on the inverter board.
Looking for LG tv remote code
Take your Shaw remote control.
Follow the directions on the back, to "program" it to interact with your TV/DVD.
If this does not work, telephone Shaw and get free technical support.
Causes of high pitched noise in lcd tvd
Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
I have an LG TV
Check the powers upplu borad for Bad Capaciotrs they will be swollen or vented on TOP.
The screen crack and no
Sorry,this can't be repair or worth repairing,because replacing the LCD screen panel or any tvs screen panels for that matter,will cost the same as a new tv.The tvs screen panels are 90% of the tv.The tv corporations produced limited screen panels,that what they charge for a tv screen panel same as a new tv,no where else u will able to find the screen panels.Ur tv now,only worth as electronic boards for parts,that it.
Not finding what you are looking for?