You can reset your HP windows password directly.The experience that I forgot windows password happenedto me a few weeks ago. My friend Acheson who is an IT engineer recommended meto take use of Windows Password Reset,which is very smart windows password reset tool and just take me a short time to reset a newly password.
You need to reset your bios, this will erase all your cmos data, incluiding your password. You nned to locate and remove cmos battery, in this model you will find the battery below your laptop, you nned to remove your back doors, locate your battery wich it is connected thru a little white conenctor to your Mobo, disconect, turn on your laptop, press f10 and this will go to your bios, remove all pass word in your security menu, turn off your laptop and reconnect your cmos battery, you will need to setup your dates corrctly.
sure...since the Airport Express runs on DHCP, and your HP may or may not integrate with that standard, you most likely need to adjust your Network Settings for that connection, so your HP is compatible with the AE DHCP settings. Hmmm..let's see..who will be most helpful? www.apple.com no doubt..
Your having driver issue's sound and Network drivers either corrupt driver missing.
http://www8.hp.com/us/en/support-drivers.html input exact information needed, download them and be done. John
The following illustration and table describe the computer TouchPad.
(6) TouchPad on/off button Enables/disables the TouchPad.
Component Description
(1) TouchPad light Blue: TouchPad is enabled.
Amber: TouchPad is disabled.
(2) TouchPad* Moves the pointer and selects or activates items on the screen.
(3) Left TouchPad button* Functions like the left button on an external mouse.
(4) Right TouchPad button* Functions like the right button on an external mouse.
(5) TouchPad scroll zone* Allows you to scroll up or down.
(6) TouchPad on/off button Enables/disables the TouchPad.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
It can't find the program or can't find the camera?If you look under the Device mMnager in the Control Panel, you should see a reference of Imaging Devices. The camera should be under it if it has not lost the driver.
Look under Quick Play. If you have buttons that automatically launch Quick Play then you can hit it and look thru the icons on the display for the camera. You can also get there by hitting Start/Programs and search the program list for Quick Play.
HP has identified a hardware issue with certain HP Pavilion
dv2000/dv6000/dv9000 and Compaq Presario V3000/V6000 series notebook
PCs, and has also released a new BIOS for these notebook PCs, version
F.39 for dv2000/V3000, and version F.3D for dv6000/dv9000/V6000.
I seriously doubt the fall had anything to do with it since it works sometimes laptops have hotkeys that activate/disable it try doing that , hope i could help!
Your computer has only 512MB of RAM.That will just barely run your XP,forget about doing anything else.You need a minimum of 1GB,2GB is even better.Your computer works in RAM not your hard-drive.The hard-drive is for storage,the RAM is for running your programs. http://h10032.www1.hp.com/ctg/Manual/c01311536.pdf
This link is your manual and it will walk you thru the procedure.Hope this helps?
wafy_m, the problem can be attributed to the graphics chipset, is lifting off of the motherboard.The mounting has loosened.This is because the cooling system for the graphics chipset, is inadequate.Chip and Chipset are slang terms for I.C. Integrated Circuit,http://en.wikipedia.org/wiki/Integrated_circuitThe graphics chipset is the GPU,http://en.wikipedia.org/wiki/GPUThe mounting of the GPU to the motherboard, is done with a BGA surface mount,http://en.wikipedia.org/wiki/Ball_grid_arrayTo explain a BGA surface mount, compare to an older Intel Pentium 4 processor, that uses a Socket 478 processor socket,http://en.wikipedia.org/wiki/Socket_478The Processor has contact pins on the bottom. 478 of 'em.The Socket 478 processor socket has matching socket holes.With a BGA surface mount there are no contact pins, nor socket holes.In place of the contact pins there are Solder Balls.In place of the socket holes there are Copper Pads.(Which have a gold plating on them)The graphics chipset is set into place over the motherboard, with it's Solder Balls lining up on the motherboard's matching Copper Pads.Heat is then applied at a specific temperature, and length of time.The Solder Balls melt, which solders the graphics chipset to the Copper Pads.(Which in turn solders the graphics chipset to the motherboard)With the inadequate cooling for the graphics chipset, after time the solder connections will begin to partially melt.This leads to a poor contact of the graphics chipset to the motherboard, and the problem you are having.As previously stated the cooling system for the graphics chipset, is inadequate.Cooling System:The cooling system consists of a Cooling Tube, Heatsink, and Fan Assembly.The Cooling Tube is a slightly flattened copper tube, filled with Nitrogen, and sealed on both ends.Towards one end of the tube is an aluminum plate. This plate sits on top of the Processor. Has four screws through it. Removing these screws removes the cooling system assembly.Coming up the tube a little bit, is another aluminum plate. This one is smaller, and sits on top of the graphics chipset. Connected at the opposite end is the Heatsink.The Heatsink is a small thin piece of metal, with Tall, Thin, fins protruding from it.Next to the Heatsink is the Fan Assembly.The Fan Assembly, is a Fan inside of a cage, or shroud.Draws air up from the bottom of the laptop, and pushes it through the Heatsink's fins, and out the side of the laptop.Heat from the graphics chipset, and the Processor, are absorbed by their metal plates.The Cooling Tube absorbs heat from the two aluminum metal plates.The Cooling Tube transfers the heat along up to the Heatsink.The Heatsink absorbs the heat, then radiates it away with the Tall, Thin fins.Airflow from the Fan Assembly, helps to carry heat away from the fins of the Heatsink.The surface area of the metal plate on top of the graphics chipset, is too small. It is inadequate in surface area size.The one on the Processor is barely adequate.http://www.youtube.com/watch?v=bnkQNmKauEc&feature=relmfuThe above is posted for reference. Pause the video at 7:43 to see the cooling system I described above.1) Black Fan Assembly to the upper left. 2) To the immediate left side of the Fan Assembly is the Heatsink.Black in color, slightly rounded outside edge, goes along the full length of the left side of the Fan Assembly. Hard to discern the fins.3) The aluminum X shaped piece with 4 black screws in it, on the copper Cooling Tube, is the metal plate for the Processor.4) Coming up the copper Cooling Tube towards the Fan Assembly, is the second aluminum metal plate. It is shaped sort of like an S, with flat ends. This plate sits on top of the graphics chipset.Solution?Properly remelt the solder connections of the graphics chipset, to the copper pads.Add surface area to the Processor's metal plate, and the graphics chipset's metal plate.PROPER method is to use a BGA Rework Machine. Performed by a shop who has one.ANY other method may is less than. The procedure may last a week, a month, or maybe longer.There was a recall on this series of Notebook PC.It is over,http://www.nvidiasettlement.com/index.html[ No, replacing the motherboard does NOT cure the problem ]For additional questions please post in a Comment.Regards,joecoolvette
extremely easy actually. there's a panel on the bottom, it should have a wifi looking symbol next to it, if not just remove panels until you find it, it's a small rectangular card with 2 wires on it that just snap on. take out the one screw securing the card, insert the new one, and installation is the reverse of removal. If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97
(If I understand your first problem is: you may have some virus and/or spyware) Update and run your anti-virus program.
You need to install update and do all the tweaks on a recognised anti-spyware program. If you have an anti-spyware program installed make sure it is NOT listed on 'The Spyware Warrior List of ‘Rogue/Suspect Anti-Spyware Products & Web Sites’ http://www.spywarewarrior.com/rogue_anti... Those are "anti-spyware programs" that install their OWN spyware, while 'supposedly' removing everything else. Use instead "Ad-Aware 2007", "Spybot - Search & Destroy", "SpywareBlaster" are three good ones. Beware of imitations and name similarities. Install and update then run them weekly after doing the latest updates. Lastly, to stay OFF of Weird and Strange websites! ;>) Install McAfee SiteAdvisor.
After you clean-up your computer.
Go to your "Device Manager" (Right click on ‘My Computer', select 'Properties', click the 'Hardware' tab, click the 'Device Manager' button. Click the "Sound video and game controllers"). If there is some kind of a "Warning" icon superimposed on the 'Vidieo Camera' icon there is your problem! If no "Warning" icons then try... One at a time... Double click on each of the devices that have 'Vidieo' in the listings. Click the "Properties" tab; look for any "Warning" icons Uninstall the DRIVERS for THAT DEVICE only. See instructions below. Click on the faulty device and hit the remove button, follow the instructions given by the program. Shutdown, restart, the device will automatically reinstall by the "Found New Hardware" program.
