20 Most Recent
Acer Aspire 5600 Series 5610-2013 Notebook - Page 2 Questions & Answers
What is the mass storage
Mass storage controller is a protocal which controls data storage to large drives and was designed to minimize the amount of CPU
involvement. Mass Storage controller drivers are required to be downloadedand installed so that the data is stored efficiently and this results in quick data storage.
Hope it helps! Good Luck!
CreativeTECH
The monitor screen on the
On most laptops, there are 2 blue-tinted pictures that may looks like light bulbs or suns located on 2 of the function keys (F1, F2, etc.) that stand for increase and decrease brightness. If you hold the "Fn" key, and start tapping the increase brightness key, the screen should turn brighter. Otherwise, you may be able to adjust screen brightness from Windows, by going to power options (control panel or right click the battery icon in the task bar) or by customizing your desktop (control panel or right click on the desktop).
I have a acer notebook
reset by going to start and tiping in word mouse it will bring your mouse settings up and change settings from there you might have to restart system first so mouse will move.
I can get to the screen stating start windows
Enter in Safe Mode because there maybe a conflict of interest with a driver. When in safe mode, you can remove programmes that have been put on recently and may be causing the problem.
Keyboard not working
try blowing out all of the dust from your keyboard using a fine air blower from an air compressor making VERY sure there is no MOISTURE in the lines.
dust causes static which causes lots of problems with a computer and its parts
or if this does not fix the problem
control panel keyboard you can change your settings there
or you might have uninstall the keyboard then reinstall it and its drivers
control panel keyboard hardware then properties you hould see driver details,update driver,roll back driver,uninstall
make sure you have the driver for the keyboard before uninstalling the driver
diconnect the keyboard then reconnect it then reinstall the driver
hope this helps
Hi, I have an Acer
This is a common complaint of the wire shorting inside, please go to my tips page so that this particular complaint was reviewed with some tips.
The short within the wire cuts off the adaptor votlage as it is in protect mode-- not a failure of the adaptor. so have the wire **** off and connected or use a new pin at the end.
Acer aspire 5610 black screen but computer works.
There is one component, the 'inverter", inside the LCD assembly that has failed. It's about $20 to buy a replacement part,
and about $60 for one hour of a qualified technician's time to disassemble your computer, replace the part, reassemble and then test your computer.
My acer aspire 5610z series
1. Check your power cord & adapter.
2. If its working then check the battery, reseat the battery & check.
3. If available then check with another battery
4. If no, then remove the battery & switch on the PC in AC mode.
5. Check if battery charging indication or AC power on indication is glowing. if not then need to change ur motherboard.
6. If indication is OK, but could not power ON then check ur RAM for any loose connection or dust. clean & reinstall.
7. If still no display, connect an external monitor, check if display is comming.
8. If Display is coming then your LCD need to replace.
Windows XP Setup hangs at 34 minutes remaining
This issue is one of the very common issues. If you are installing the Windows on a formatted Drive, remove any additional external devices like memory card, usb mouse/keyboard. Now go into the Bios and reset it to Optimized Default setting (restore the bios settings to default), again before you exit the bios settings, go into boot priority settings and disable "fast boot", set the first boot priority device to "Cd-rom" and second to "hard-drive 0", save the settings and restart your system and boot from the cd by pressing "enter" or "spacebar" when asked to press any key. And check whether this helps or not.
If you are installing additional windows on the system, you can try this hotfix from microsoft
(click here to download) [or copy and paste this link into your browser: http://www.microsoft.com/downloads/details.aspx?FamilyID=4e370d0f-bca4-4a2a-9cde-dfe2da16672a&DisplayLang=en]
before installing the new windows
This problem is mainly caused by hardware conflict or unsupported hardwares.
I wish you good luck.
Thanks for using
FixYa.
I am trying to fix my web cam problem with my
Ok, what you need to do, is Unzip the file, to any convenient place, say C:\WebCam then go to that directory after it decompresses, and look for the main install, or setup, .exe program, now, double click on that, and the install program will run and install the software, it may require user input, so follow any instruction, usually saying Yes to everything, but READ each section, now once it is installed, it will be ready to use.Once installed you can also download freeware webcam software. a particularly good one is AMCAP.
Tryied to install service pack 1. error
Run Windows Update again and make sure that you have all of the updates that are being offered. Ignore/untick the SP1 update if it is showing on Windows Update until you install all of the other updates.
Not finding what you are looking for?