Top 20 Panasonic Home Theater System System Questions & Answers

I had this problem on my own tv and it nearly drove me mad, in tv menu under sound submenu their is a setting called spdif mode, there are choices in this mode that can be made, My current tv has Auto, off and pcm. some tv's have more choices. Try playing with these settings and its possible you can get it to work with cable, your cable signal probably uses a different sound format to the blueray/dvd player. note if this works the sound might not work when you go back to blueray/dvd player so note the setting before you change it in case you need to go back to it when you change over viewing choices. good luck.

Panny dude is full of ----. Just use lower gauge cable for long lengths and take care not to short out the connections

Is there anything mentioned about cable accessible via the remote ... assuming you have one that works for the unit?

Here is user manual http://shop.panasonic.com/shop/model/SC-HT820V?t=manuals&support=y

If the CD plays correctly in some other player (or in the CD-player in your vehicle), then your Panasonic CD-player is the cause of the problem. If under warranty, get it replaced. If not under warranty, purchase a replacement.

sounds like unit is faulty and in protection

Look like malfunction AMP PCB Board.Please open top cover, unplug flex cable attached to connector AMP PCB. Try now power- ON the unit.

www.panasonic.com/uk/support.html

Please open link USER Manual , I hope it will helpful.

Sensor switch inside detects the position of the tray check for dirt on contacts check internal connections if all good you have a fault on the the logic board

1. Check with one speaker all speaker channels. If no sound probability does not work AMP board .

Power supply board malfunction, replace it. check avasytemparts.com

We recommend you remove all speaker cables and HDMI cables from the system. Then turn the system back on and see if the U99 message appears. If it does, then we recommend having the system evaluated by an authorized service center using the below link. www.panasonic.com/repair Welcome to Panasonic Online Repair

We recommend you remove all speaker cables and HDMI cables from the system. Then turn the system back on and see if the U99 message appears. If it does, then we recommend having the system evaluated by an authorized service center using the below link. www.panasonic.com/repair Welcome to Panasonic Online Repair

Please check the iPOD DOC pins condition. available parts for model SA-PT960 avsystemaparts.com

Please check iPOD Doc port of pins condition. available parts for model Panasonic SA-PT avsystemparts.com

You maybe able to get a region free code for your player from one of these WEB sites. www.dvdexploder.com/ www.videohelp.com/dvdhacks www.download-info.com/dvd/index_new.htm http://www.dvddemystifiziert.de/codefree_en/codefree.html

Check and correct the speaker cable connections

There should be an audio out plug on the back of the TV. You may even have a choice on the back to attach it with either phono cables or optical.

check system output by aux port if output is normal then system amplification work proper try another cd all cd it reading or init then lense clean with lense cleaner and try