20 Most Recent Sunbeam 5891 Bread Maker - Page 2 Questions & Answers

try if you don't have user manual and it's troubleshooting: http://kitchen.manualsonline.com/manuals/mfg/sunbeam/5891_1_2.html

The error code for HHH usually means it is too hot, if it is has been used recently. If it has, unplug the machine, and try to wait for it to cool down with the lid open for about 15-20 minutes. If that is not the case, I would suggest you to contact the manufacturer at:

https://secure.sunbeam.ca/ContactUs.aspx

Hope this helps!
Remember to give me 4 Thumbs Up
for all the hard work to the Community! :D
~~Dayminner

Check Auto parts stores near you, Gates #537-3M-09 Belt is the one I used. loosen motor screws for enough movement to get it on the then tight screws with belt snug to finish.

You need a new a new machine.

Thih site does have Some Sunbeam replacement parts:

http://www.abtecparts.com/oster_sunbeam_breadmakers.htm

You might try contacting them and making a Parts Inquiry:

http://www.abtecparts.com/parts_enquiry.htm

Alternatively contact the nearest Sunbeam Service Center:

http://www.sunbeam.com/ServiceLocator.aspx?section=kitchen

Make sure you are using the correct type of yeast. The old style active dry yeast is not as good. I recommend that you try Red Star Quick Rise Instant Dry yeast. Also be sure to store the yeast in the refrigerator. And, if you are not using a mix, try King Arthur Flour, it costs a bit more, but their tighter standards means you get more consistent results. They also have bakers who will answer your questions for free at 802-649-3717.

here is a video on how to do it

As I remember I had to take out the steel inside housing to get to the belt which is next to the motor.

Hi As long as the drive mechanism beneath the pan is still stiff to turn and fels like it engages the motor you should be fine. See pic. The centre 4 spike drive unit is what is important. Normally the toothed drive belt will fail. If this is still good then replace the pan.

I mail replacement parts to those in the lower 48 states. I may have a replacement belt for your machine. There is a part code on the side of the old belt. The figures will look something like this: STS 60 S3M 471 Email me that par code and I'll see if I have it in inventory. My email is [email protected]