20 Most Recent
Maytag MDB7100AWB Dishwasher Questions & Answers
Maytag Dishwasher flashing lights
I have the same problem with the lights flashing on the control panel.
It pops up every 4 or 5 months. The only solution I have found is to
press the delay/resume button one time then press the drain/off button
twice. You may have to hold the keys down for a couple of seconds.
This seems to reset something in the panel. Make sure you haven't
pressed the 3 second lock button or it won't work.
5/9/2021 12:54:40 AM •
Maytag...
•
Answered
on May 09, 2021
My Maytag dishwasher model MDB7100AWB stopped
More than likely the control panel is defective. Contact the company at the link for troubleshooting help[ and also the parts that you may need. https://www.repairclinic.com/
6/27/2017 4:13:21 PM •
Maytag...
•
Answered
on Jun 27, 2017
How do I stop glass etching in my dishwasher
I believe most dishwashers will etch , to some degree, over time with repeated washings. The type detergent you use could also factor in as well as the temp you wash at.
9/6/2014 12:19:34 AM •
Maytag...
•
Answered
on Sep 06, 2014
Lighted "3" shows, dishwasher won't start
PRESS AND HOLD THE BUTTON NEXT THE LOCK3 LIGHT FOR 3 SECONDS TO UNLOCK THE CONTROL PANEL. TO RELOCK THE CONTROL PANEL PRESS THE SAME BUTTON FOR 3 SECONDS. THANKS AGAIN
7/1/2014 6:53:08 PM •
Maytag...
•
Answered
on Jul 01, 2014
Not finding what you are looking for?