Kodak EASYSHARE Plus Series 3 Thermal Photo Printer - Answered Questions & Fixed issues

Hi Cort,Is there any paper error on the printer?Is the paper light on?If so,please clear the paper error before attempting to remove the color cartridge!The cartridge may have locked into place because of the paper error.If its flashing red,it means the cartridge is not full seated.You may have to push it until it clicks into place. Make sure the paper light is off before proceeding.

• Open the cartridge door,push up on the green lever and then slide the cartridge out.

Hope this helps.Thanks!Please rate this answer.

Hello, Henry.

After you have taken a picture with your C360, placing it on the printer dock and pressing "Print", does the copy screen appear. ? If not, any error messages ?

Has it ever worked and you are now experiencing a problem ?

Have you tried the dock with other cameras successfully ?

Thanks.

The printer may be runnung out of ink or requires alligment adjustments to fit into the printing paper. select portrait or landscape printign formats to fit pictures. esle, attempt to print small size pictures instead.

you might be printing outside of the defined border?

what prgrm are you using to print?

I can see the page in excel with data i want to print but when i want to see the print preview or print the page, i am unbale to access the page. some fixed pages crops up for print preview or on printing the page

Most of these issues are caused by drivers in the computer that are not agreeing with the pritner.

I would doubt its something hardware as its prting half.

it also could be a setting.


let me know

Thanks please do leave ratings and feedback Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Call a Kodak shop and ask what causes that problem and how to eliminate it. It's probably a setting you need to change.
Jim Hart

Uninstall the software.
Download the _free_ "GIMP" (Graphical Image Manipulation Program) from www.gimp.org

Dirty rollers? I had the same problem and think the rollers are no longer sticky enough to pick up the paper due to a coating of dust... maybe cleaning the rollers would work?

Hi there ok Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Here is the download page for the printer:

http://support.lexmark.com/index?locale=en&segment=SUPPORT&startover=y&userlocale=EN_US&question=x1270&productCode=LEXMARK_X1270&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X1270&searchid=1265158728400#1

It is directly from the manufacturer (LEXMARK). It should have what you need.

throw out your printer and buy another brand. if you call18002356325 the call goes to manila and chances are you will be talking to some one who only speaks partial english and knows nothing about kodak products but will read to you from these internet instuctions that you just read !!! kodak has become a very anti-american company in so many ways!!!

Hi friend,

This is depend on the page layout or preference the pages,firstly sure that you have the correct page layout in your program and set the printer preferences to "Print as in document" or Fit to page whatever the template requires.
 this is really helpful to you. 
Thanks,

Go in to the printer properties and perform a head clean.

Only put about 20 sheets in at a time and fan the sheets a few times before loading them, so they don't stick together. Although they come in packs of 25, the docks work better if you just take a few out of the pack before loading the tray. You can easily put them in, after you print a few pictures.

Hi,

the only possibilty which I know is to try a firmwareupdate of you printer dock.

You can download it here.

Follow the installation instruction on the website.

Hello,

You may visit www.kodak.com/go/parts or call 1.800.235.6325

Thanks.

Neerak21

Here are the steps:

1.Remove the power cable from the printer.
2.Remove the paper tray from the printer and leave the

paper tray door open.
3.Lightly moisten a lint-free cloth with water.
4.Use the moistened cloth to gently wipe clean the surface

of the roller.
5.Let the feed roller dry before plugging back the AC

power cord
6. Fan the paper to keep the sheets from sticking

together.
7.Place 15 - 20 sheets of paper into the paper tray
8.Insert the paper tray into the printer.
9. Make a print.

If issue persists, call 1.800.235.6325 for repair.

Here are the steps:

1.Remove the power cable from the printer.
2.Remove the paper tray from the printer.

3.Verify that the paper you're using has KODAK XTRALIFE Paper
4. Insert the paper tray into the printer.
5. Open the color cartridge door, then remove the color cartridge.
6.Install the color cartridge, and verify that it is fully engaged.
7.Close the color cartridge door.
8.Connect the power cable to the printer.
Wait for the printer to initialize (the paper may eject automatically).

If issue persist, call 1.800.235.6325 for repair.

Are you using dot matrix printer ? related to your statement that you've change the ribbon.
It's could be problem with printer's print head, could be one or more
pins are broken