All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater - Page 8 - Answered Questions & Fixed issues


you can order the ignitor directly from this link http://www.masterdist.net/allproheaters if you have any further questions please message me back and please remember to rank how this opinion has helped Have a Great Day and Merry Christmas
Rick

All-Pro Kerosene... | Answered on Dec 16, 2010 | 41 views


Hi,


Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters





Torpedo Heater Pump Pressure Adjustment


heatman101

All-Pro Kerosene... | Answered on Dec 09, 2010 | 413 views


Have you double checked and made sure your getting power to the heater? Have you checkd the fuse on the ignition control board to see if it is good? If you have power goin to the heater and the fuse is good and nothing coming out of the board, then I would say you have a bad board. Hopefully it is just the fuse.

All-Pro Kerosene... | Answered on Dec 08, 2010 | 31 views


Dear discophil,

If you contact the technical hotline for Jack Sealey Ltd on 01284 757500 they should be able to solve your problem for you.

Regards,
Jack Sealey Ltd

All-Pro Kerosene... | Answered on Dec 04, 2010 | 263 views


Odds are, your air pump is locked up. Remove the cover on the back of the fan motor, remove the pump cover and carefully remove the air pump rotor and blades. If the motor spins freely and will start when plugged in, the pump housing plates probably have a bit of corrosion on them. Lightly clean the pump housing end plates with fine grit sandpaper, wipe clean and re-assemble. Should fix the problem. Does the breaker trip when this happens?

All-Pro Kerosene... | Answered on Dec 01, 2010 | 583 views


These units have a air pump on the back of the fan motor. Has anyone messed with the settings? The pump usually runs off of 5 to 6 lbs. of pump pressure. This is what controls the fuel flow that is sprayed out of the fuel injector. This unit also should have a photo eye for flame out control. It is positioned near the ignitor looking though a hole in the combustion chamber. Make sure it is clean and looking in the hole. Make sure your ignitor is working also.

All-Pro Kerosene... | Answered on Feb 13, 2011 | 287 views


Hi,


Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters



Torpedo Heater Pump Pressure Adjustment


heatman101

All-Pro Kerosene... | Answered on Nov 29, 2010 | 801 views


Can see fuel at nozzel and have fire at electrode but will not burn

All-Pro Kerosene... | Answered on Nov 25, 2010 | 529 views


You can get them at www.allpartsinc.com

Here is a link:

http://www.allpartsinc.com/Items.aspx?key=search&code=__ALLCATS__&searchval=pp200&incl_m=F

All-Pro Kerosene... | Answered on Nov 19, 2010 | 421 views


inside the machine is two carbon electrodes that ignite the fuel and if they are burnt away it will not work ,check the electrodes and make sure they are sparking across but then try it with the cover off as the air flow stops them from sparking if the coil is low or the gap isnt right .This is the most common cause of problems with these machines ,also the same problem with steam cleaners as well

All-Pro Kerosene... | Answered on Nov 14, 2010 | 43 views


Hi,
Here are a couple of tips that I wrote that tell you how to troubleshoot aTorpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters Torpedo Heater Pump Pressure Adjustment
heatman101

All-Pro Kerosene... | Answered on Oct 31, 2010 | 1,193 views


Follow this link. It sounds as if the rotor (air pump) is broken and needs to be replaced. Replace the rotor, then set the pump pressure with a low pressure gauge..
How to replace a rotor

How to set the pump pressure

Good luck!

All-Pro Kerosene... | Answered on Oct 20, 2010 | 69 views


You can go to www.desaparts.com to find the owners manual.

Here is a link directly to the manual.

http://shoppingcart.msservicecompany.com/msservice_net/product_files/109891-01B/109891-01B.pdf

All-Pro Kerosene... | Answered on Dec 28, 2010 | 1,405 views


Here is a link to the service manual for the spark plug model heaters.

http://www.desaparts.com/service_manuals.html

All-Pro Kerosene... | Answered on Oct 07, 2010 | 678 views


wendy425,

All Pro heaters and Reddy Heaters are the same.

This is a classic reddy heater problem. They use the bleed air to determine the pump pressure and ultimately the mix of the air/fuel. Once the filter gets dirty the relationship changes and the unit gets too much fuel. The solution is to get a new filter and the pressure gauge necessary to set the pressure after installing the new filter.

I have a tip at http://www.fixya.com/support/r4124129-yearly_maintenance_reddy_heaters which explains the problem, where to get the parts and how to complete the repair.

Thanks for using FixYa and the generous rating.

hardrocko

All-Pro Kerosene... | Answered on Sep 30, 2010 | 116 views


You need to make sure the pressure it correct and that you have no leaks or cracks on the rear cover of the pump.
Sometimes you will get a small crack in the plastic housing and it will cause low pressure.
Check to make sure the photocell is clean and lined up properly to see the flame.
If you hold you finger over the pump adjustment screw you should see the pump pressure go much higher.

All-Pro Kerosene... | Answered on Sep 28, 2010 | 102 views


Hi,
Here is a tip that I wrote that tells you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters
heatman101

All-Pro Kerosene... | Answered on Sep 17, 2010 | 406 views


check the fan their are very little parts that would cause that the main one is the fan

All-Pro Kerosene... | Answered on Sep 12, 2010 | 44 views


Call 1-800-654-8534 for parts

All-Pro Kerosene... | Answered on May 10, 2010 | 225 views


You can order part by calling 1-800-654-8534

All-Pro Kerosene... | Answered on May 10, 2010 | 202 views

Not finding what you are looking for?
All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater Logo

376 questions posted

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

Paul Carew

Level 3 Expert

3489 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...