20 Most Recent
Whirlpool GHW9400 Duet Washer - Page 9 Questions & Answers
How can I correct error e09 f01?
I had the same problem but the reset suggested above didn't work for long. As it turns out, I had a sock stuck in my trap. Gettign to it was a pain because this model doesnt have a convenient access door in the front. I made a video below that can show you how to check the trap.
F25 code on a Whirlpool WFC7500VW0
Jerry, if you lift the top up to your unit you will find a repair sheet along with the codes inside, that will help you through your problem. Normally when this happens you will have to replace the main control board in the top of your unit. Check for the paper work first though.
How do I run a diagnostic test?
The SD error can mean a couple things. Suds detected, this happens when using the incorrect wash soap. It has to have the "he" logo on the packaging. I know because I used the wrong soap. My clothes would spin but not drain the water. It gave me the SD error. But it can also mean that there is clog or something in the drain hose or drain pump. I had my husband raise up the washer so I could check the hoses for baby socks or ridiculous amounts of dog hair. I found a clump of polyfil from a dog bed right at the intake of the drain pump. I removed it but still no luck. It seems the drain pump was burned up or working at a seriously compromised position. He removed the pump for me and I ordered a new one on Amazon prime. I searched for exact model and oem drain pump. It came in today and I installed it myself. Finally, after a couple weeks I was able to wash and dry towels in one whack! I figured all this out by coming here and searching for a free service manual for my make and model. The service manual really goes in depth on making repairs and it was easy to understand. It gives you the error code, possible reasons and how to fix or troubleshoot them. I had numerous problems with my cabrio and as of tonight, I have over more then to fix and it is probably polyfil related! Good luck.
Door lock is flashing and it wont open up and f9 and E1 is popping up
Normally when the door doesn't open, there is water in the tub. It's a safety feature. Have you tried running a drain and spin? A clogged up drain pump chamber or a bad drain pump can cause this. Another issue might be with the door lock it self. If the internal mechanism breaks, it can cause the blinking lights. Good Luck!
Why won't it start?
The first thing you might check is to see if there is a problem with the door switch. It lets the washer know that the door is closed so water doesn't spill out. Visually check to see if it looks damaged in any way or if something may have gotten jammed or gunk built up. We have a top load whirlpool that got detergent spilled in the door switch area and I had to clean it out. It worked after that.
Not finding what you are looking for?