Hello and welcome to FixYa
FDL is a door lock error and is caused due to an
issue with the door lock when it is unable to lock/unlock. Please check the
door lock mechanism/door switch assembly and replace the part that has gone bad
so that the issue is resolved. Please get back to me if you have any other
questions.
Kevin
Hello & Welcome to FixYa
Error Code F1 means that the control is either bad
or the wiring harness to the control has some issues. Please check the control
board for any bad components as you might need complete replacement of the
control. Please get back to me if you have any other questions.
Kevin
Hello & Welcome to FixYa
F02 is a drain error in your Kenmore washer, if
the unit is unable to drain then after 4 minutes it will display suds and then
F02. The first thing that should be done is cleaning the drain hose and the
drain pump filter, you can take out three torx screws from the bottom front
panel and then clean the area completely, lift up the cap to clean the filter.
If the error returns then check the drain pump if it is not working then
replacing the pump is recommended repair. Please get back to me if you have any
other questions.
Kevin
167 questions posted
Usually answered in minutes!
9,125 Questions
187 Questions
64 Questions
34 Questions