20 Most Recent Whirlpool GHW9400 Duet Washer Questions & Answers

0 Answers

Water will come in at beginning of cycle on a Hot/Cold wash but not in rinse cycle?

because the rinse uses cold water and u may have a cold water issue with the water inlet valve, the water inlet valve cold coil may have gone bad. test it with a meter and voltage

Whirlpool... | Answered on May 12, 2015

1 Answer

Error code F 6

http://whirlpool.custhelp.com/cgi-bin/whirlpool.cfg/php/enduser/std_adp.php?p_faqid=2184&p_created=1186598676&p_sid=8GeHPCbj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzQsMzQmcF9wcm9kcz0yOTMmcF9jYXRzPSZwX3B2PTEuMjkzJnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9ZXJyb3IgY29kZSBGIDY*&p_li=&p_topview=1

please copy and paste this link into your browser.
it shows you the error code and the meaning. It also shows you what o look for to solve the problem.

Please do not forget to rate and comment about your experience on fixya today.

Whirlpool... | Answered on Apr 20, 2015

1 Answer

How do I unlock whirlpool washer

Hold lock button in for 3+ seconds

Whirlpool... | Answered on Mar 03, 2015

pdf Manual

GHW9400 Duet Washer Manual

Whirlpool GHW9400 Duet Washer | Uploaded on Feb 02, 2015

1 Answer

How do I get the relay off the CCU in Whirlpool Duet Washer?

not made to
repace ccu

Whirlpool... | Answered on Dec 17, 2014

1 Answer

My Whirlpool Duet washer is making a loud squealing noise when filling with cold water, or it reduces the cold water to a trickle, which sometimes causes the washer to throw an FH code. It does not h

Hi. Got some info about the FH error from Whirlool service manual.

F/H

No water detected entering machine or Pressure switch trip not detected.

If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed.

In my experience the CCU is the problem (control board).

IF the machine has water! If not, check water valve, hose, water tap.

Do it overfill? If thats the case, the pressure switch is gone, its hose has a leak.

Hope this helps you

Whirlpool... | Answered on Sep 27, 2014

1 Answer

Know what is causing my washer to be off balance . I have made sure it is level already.?

If you leveled it for sure and legs are tight u probably are putting to much clothes in there so on spin causeing it to wable

Whirlpool... | Answered on Sep 26, 2014

0 Answers

Ghw9150w4 parts still available

Whirlpool... | Posted on Jul 10, 2014 | Be the first to answer

0 Answers

Ghw 9150 pwo manual ghw9150p

Whirlpool... | Posted on Jul 10, 2014 | Be the first to answer

0 Answers

What is dl error code?

Whirlpool... | Posted on Jul 07, 2014 | Be the first to answer

0 Answers

Error code F06

Whirlpool... | Posted on Jul 04, 2014 | Be the first to answer

1 Answer

Beeping

the beeping usually is there to tell you something.
It is possible there is not hot water being supplied when you have hot or warm selected
Maybe the water is filling to slow
maybe the filter i clogged
maybe the barrel is out of alignment ( cased but imbalance from previous wash )
is it a top or front loader.
what lights flash when the beeping occurs?

Whirlpool... | Answered on Jul 01, 2014

0 Answers