20 Most Recent Canon ImageRunner 3045 | IR3045 | - Page 7 Questions & Answers

404 error = question has been deleted [ problem has existed with question or was spammed ]

The E000073-0001 error code on the Canon ImagePRESS C1 photocopier is related to a problem with the temperature sensor in the fuser unit. Here are some steps you can take to try to resolve this issue:

1. Turn off the copier and unplug it from the power source. Allow it to cool down for a few minutes.
2. Check the fuser unit for any visible signs of damage, such as wear or burn marks.
3. Check the temperature sensor and its wiring for any signs of damage, such as frayed wires or broken connections.
4. Reconnect any loose or disconnected wiring and ensure that the fuser unit is properly seated and connected.
5. Power on the copier and see if the error code has cleared. If it hasn't, you may need to replace the fuser unit or the temperature sensor.

If you are not comfortable performing these steps or if the error code persists after attempting to troubleshoot the issue, it is recommended that you contact a professional technician or service provider who is experienced in repairing Canon photocopiers. They will be able to diagnose and fix the problem.

Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:

1. Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
2. Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
3. Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
4. Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
5. Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."

If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively

It sounds like you may be experiencing a mechanical issue with the Canon Imageprograf Pro-2100. The error code EC1C-2036 is related to the lower drive nipe arm unit, which is responsible for moving the different components of the printer in order to produce prints. This error can be caused by foreign objects becoming stuck in the unit, or by the unit itself becoming worn out or damaged. To resolve the issue, you will need to first inspect the unit for any foreign objects, and if none are found, then you will need to replace the unit. If you are unable to locate the part or don't feel comfortable attempting a repair, then it is recommended that you contact a professional for assistance.

The best way to reset your Canon printer is to find and hold the reset button on your printer. This usually consists of a small pinhole or recessed button located on the back or side of the printer, depending on the model. Press and hold the button for a few seconds until the printer resets itself.

Error code CANON iR4570/ iR3570 / iR2870 / iR2270 ' Tjah Semrawut Blog (wordpress.com)

errore SC544

https://www.google.com/search?q=CANON+IMAGERUNNER+ADVANCE+2030+error+code+E000196-1BFF ..

Try installing the Windows 10 x64 driver for the Pixma MP560 from https://canoncanada.custhelp.com/app/browse/a_status/published/channelRecordID/DRIVERS_AND_SOFTWARE/pageSize/25/productCategoryAnsList/RN_PRODUCT_1801%3ARN_CATEGORY_2652%3ARN_CATEGORY_318/productRecordID/RN_PRODUCT_1801/truncate/200/type/browse/session/L3RpbWUvMTY3NjI0NTQxMC9nZW4vMTY3NjI0NTQxMC9zaWQvZlVzazJtd0U3ZTZIWmN2bllCZnN1UVdGJTdFbTBINENOWnI5bl9FN2cxTVdWRHVSRkt4b2xlS1hDYUJneUNjRGh1c192Nk9kOEhiMTdId3FLX3BCdDhtZGNLX3VrbGpIczNnYkg2dHpFS3V5dGhWa0ZEWlNOU1RQb1ElMjElMjE%3D . Use the drop-down menu to specifically choose that version. Most Windows 10 64-bit signed drivers work under Windows 11. (At least one person had to download the file twice.) I hope this helps. Cindy Wells

Question edited for clarity.

How to Fix Error Support Code 5b02 on Canon Printers

https://canonservice.net > How to Error 5b02 is an alarm warning for errors that occur on the printer, we have to do a reset so that the printer returns to its initial settings and Error ...

Take a bottle of Isopropyl Alcohol and clean the electrical contacts on the drum and also the contacts on the machine. Bad connection. Videos as well.

I'am making over $15k a month working online. I kept seeing how some people are able to earn a lot of money online, so I decided to look into it. I had luck to stumble upon something that totally changed my life. After 2 months of searching, last month I received a paycheck for $15376 for just working on the laptop for a few hours weekly. I was amazed how easy it was after I tried the copy below web...www.join.hiring9.com

In the link https://www.google.com/search?q=Canon+C3226i++error+code+E000202-0010 ..

Change the primary charge roller

Boot hard drive issue https://www.google.com/search?q=Canon+imageRUNNER+ADVANCE+4225+showing+error+e000602-1111

The error message "error occurred 5B00" on a Canon MX320 printer typically indicates a problem with the waste ink absorber. The waste ink absorber is a component in the printer that absorbs excess ink that is expelled during cleaning and other maintenance operations. When the waste ink absorber becomes full, it can cause this error to occur. Here are a few things you can try to troubleshoot the problem:

1. Reset the printer: You can reset the printer by unplugging it from the power source, waiting a few minutes, and then plugging it back in.
2. Service mode: You can enter the service mode by pressing the "Menu" button, then "Copying", then "Functions", then "Maintenance" and then "OK". Once in service mode, you can try to reset the waste ink counter.
3. Clean the print head: Clean the print head to ensure that the printer is properly aligned and functioning correctly.
4. Replace the waste ink absorber: If the waste ink absorber is full, it will need to be replaced.

1. Turn off the printer and unplug the power cord.
2. Open the printer cover and locate the ink absorber. It is a small, sponge-like pad that absorbs excess ink.
3. Use a dry cloth to gently clean the ink absorber and the surrounding area.
4. Replace the ink absorber with a new one. If you do not have a replacement ink absorber, you can purchase one from the Canon website or from a third-party supplier.
5. Reinstall the printer cover and plug the printer back in.
6. Turn the printer back on and test it to ensure that the error message has been cleared.

If you are not comfortable with the process or don't have the necessary replacement parts it's better to contact canon's customer support, they will guide you through the process and make sure that the issue is resolved.

1. Turn off the printer and unplug the power cord.
2. Open the ADF cover and remove any paper that may be inside.
3. Locate the ADF roller on the left side of the printer, and press the tab on the bottom of the roller to release it from the printer.
4. Take the new ADF roller and insert it into the printer, making sure it clicks into place.
5. Repeat the process for the ADF roller on the right side of the printer.
6. Close the ADF cover and plug the printer back in.
7. Turn the printer back on and test the ADF to ensure that it is working properly.

It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the printer's user manual or contact the manufacturer for assistance.

If your Canon IR2520 is jamming in the exit tray after initializing the machine, it could be caused by a few different issues:

• Paper tray: Make sure that the paper tray is loaded correctly and that the paper is not jammed or loaded incorrectly. Also, check if the paper tray is not overfilled or if the paper is not wrinkled.
• Pick-up roller: The pick-up roller is responsible for picking up paper from the tray and feed it to the printer. Check if it is dirty or worn out.
• Exit guide: The exit guide is responsible for directing the paper out of the machine. Make sure that it is not blocked or bent, which could cause the paper to jam.
• Fuser: The fuser unit could be malfunctioning. The fuser is responsible for heating and fusing the toner to the paper. If it is not working properly, it could cause paper jams.
• Feed rollers: The feed rollers are responsible for feeding the paper through the printer. Check if they are dirty or worn out.
• Paper jam sensor: The paper jam sensor may be malfunctioning. If the sensor is not working correctly, it may not detect a jam and the printer will continue to try to feed paper through.
• It is recommended to check the copier's manual or consult with the manufacturer's technical support to troubleshoot the problem. They may provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

These are general suggestions and your specific case may require different actions. Regenerate response