20 Most Recent Olevia LT27HVX 27 in. LCD Television - Page 3 Questions & Answers

You need to add a wireless card to your pc.Check Best Buy for price. You can also connect from the router port to your pc with a ethernet cable, one should have came with your router. use the connect network menu from control panel on your PC.

Drew

Your tv has a built in tuner, just plug in to ANT on rear of set and select ANTENNA from your menu screen.

The Playstsaion vidoe resolution is too high for the TV to display, you need to lower the Playstation (see your owner manaual) it to the native resolution of the TV for it to work.
http://manuals.playstation.net/document/en/ps3/current/settings/videooutput.html

http://www.youtube.com/watch?v=JHQnpyIE7sE

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm

Hello
The fault is not related to any button or remote control problem. There is some short inside the secondary voltage section of the power supply section inside your Olevia. Normally, if the inverter board, that generates high voltage of the CCFL lamps used inside, to generate backlight will get winding short inside it in between. If so, when set's power supply sections [SMPS] tries to start up, and if it will get any sign of short, the main system control IC will send a stop signal to stop the power switching section. After that, when it has been done, the power supply section again tries to start, detects short, and shut down again. This process is going on now with your Tv. The high voltage inverter section is very dangerous to one who doesn't have any knoledge in electronics. If there is an opwn circuit inside the inverter, it will arc to the surroundings.
In fact, your set's trouble is not a user repairable one. If you have enough knoledge in electronics, and have all the measuring equipments, just start from this section. LCD power supply, all types and all company's are very sensitive to any short circuit, and you must be well experienced to detect the short. If you are able to do, have confidence and more patience, proceed. Otherwise get help from any experience service technician you trust. OK.

Use a fan to cool the tv and see if it will work better.

I'm not sure there is a code for the b107a. (There wasn't on my old Sony remote either.) I just bought a Sony RM-VLZ620 for about $20 and it does have codes for Olevia.

I just bought a Sony RM-VLZ620 for about $20 and it has Olevia codes and works on my 532-B12. It controls up to 8 devices and I've now got it running our Sony DVD, Sony amp, and Sharp VCR as well.

This hopefully is resolved for you, but here are some easy steps if you ever run into this problem again. If you are at TV1 where the receiver box is located:
You want to make sure that the tv is on channel 3 or 4, and usually on an input. Since the tv says Channel unavailable, it sounds like you do need to be on an input. Try video 1 or 2, or cycle through your inputs.
If you are at TV2
You will want to make sure that your tv is on channel 60 or 73, and you will want to make sure that the receiver box has 3 lights on the front. (Blue, green, yellow.) You will need all 3 lights ont he receiver box for the TV2 to show a picture. I hope that this helps.

Becki Barned
DISH Network Customer Service

The manual is available for (free) download here:

http://www.retrevo.com/support/Olevia-LT27HVS-TVs-manual/id/563dj885/t/2/

Click on the download link and on the next screen you do NOT need to enter your email address to download the file. Just enter the security code and the download will start.

Hope this helps.

Tries websites like Ebay.com,Amazon.com to buy a used or new base stands.

turn ur camera on your phone or use a real camera, point the remote at the camera lens and press a button, you should see a flash on the screen of the phone/camera, if you do not, the remote isn't outputing and needs fixing or replacement.

If your looking for a number to contact Olevia they are out of business for 2+ years now..
But what is wrong with the TV? Olevia's are easy to service...

http://tvtechwork.webs.com/

I have been finding some strange lockup/unlock sequences recently.It's really getting out of hand and is just plain stupid and unnecessary.For what purpose,who knows.Try holding the volume up and volume down buttons down at the same time for about 5 seconds,first on the TV,then on the remote.If that doesn't work,try the channel up and down.If that doesn't work,try some other things such as the 2 outer buttons other than the power,or the 2 inner buttons,etc.If that doesn't work,please let me know and I may end up trying to start a business with a basic functioning TV,I swear,lol.If it does work,I am sure you will have the same opinion.Good luck,Greg

Same thing happpened to us with a Vizio 26" TV. Its a defective panel,and cannont be fixed, we were told. Vizio replaced the TV under warranty.

Check the power source?Have power to the tv at all?Power LED light incation flashes?Yes?That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Any computer store should have an electrical cord for most flat panel TVs. Thanks for asking and show a few hands of support!

Sorry this LCD tv model don't have this function.

We had this same problem as well and we finally found the answer, the code for the COX remote (silver on top black on bottom) is 1240.

Hello.
There is no bulb in your TV that you can replace.
TV have to be diagnosed by professional.
You could have failed backlight, T-CON or LCD panel itself.
Small possibility of main board failure.
Regards.
Russ.