Samsung SC-D353 Mini DV Digital Camcorder - Answered Questions & Fixed issues
What is a ISO on a camera
its the light sensitivitiy of the cam....exampel when you heave some fast movments youll heave to set a high iso rate.for a slow moves a low iso rate
I want to use my samsung sc d353 camcorder with my
To use your device with your computer,
>You need to install the driver that came with it in the box. If you do not have the driver, click this
LINK to download it (you can also find other downloads on the site to help you get the best out of your camera).
>Next you connect your device to your computer with the firewire cable that came with it.
>To capture your videos, you need a good video capture software. These software also edit your videos. Try Adobe Premier Pro. Its a very good application for this. You can download from Adobe.com. This software though is for really experienced users. Windows Movie Maker is a free software that came installed in your windows Computer.
> Once captured. You can now edit. Read the help sections of whichever video capture software you decide to use as it will explain in details how to go about making the right connection.
Samsung SC-D363. Dropped about
Hi J,
Fixya makes me laugh sometimes. I've been a camcorder tech for 25 years. There are two movable lenses inside the lens assembly in your particular. Both are motorized, the zoom and focus lenses. What has happened is that the focus lens cannot move. If you are handy and very careful, you can take the camcorder apart and fix it. Label your screws, there are different thread types and legnths. Inspect where the optical unit plugs into the main board. Make sure it's plugged in fully and neither connector is partly torn from it's board. If that is OK, remove the optical assembly -there are two screws that attach it to the main board. Inspect the ribbon cable that wraps around the optical assembly for tears or other damage - particularly where it runs to the focus motor. If all is ok remove the focus motor VERY CAREFULLY so as not to damage the ribbon and look inside the lens assembly. You will see a little spring loaded plastic arm that runs back and forth on the worm shaft of the motor you removed. It is likely popped askew or off the lens bracket. You need to use a very small screwdriver or dental pick to pop it back into its correct position. Make sure the lens can move forward and back freely through it's range of motion. Reassemble everything, being careful to fit the little arm onto the worm shaft of the motor. That should fix you up!
Hi I bought a samsung
Dear Rosemarypete,
My solution for you is by way of providing you the manual so you can either view it on your computer, or so if you want a hard copy of this you can keep it on paper. So here is the answer.
Here is a copy of the manual I have found for you, the only trick to this though that it is in .PDF file format, so what you will need to do is print this out, or save it to a USB Solid State Flash Drive (or known as a usb pen drive, thumb drive, key drive etc etc), and walk it to another computer and then print it from that location if you do not own a printer. One quick note though, you will need either adobe reader or some version of acrobat in order to view .PDF file formats/ extensions. These you can find pretty much anywhere.
Anyway the link you will need is
choose your language and region then go to the following address:
http://www.usersmanualguide.com/samsung/camcorder__mini-dv/page2
I hope this is the fixya for you, and if there is anything further that you require regarding this then please do not hesitate to get hold of me
yours sincerely
Oz
Shooting in black and white --i don't know what is
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
3. Press the MENU button.
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.
5. Move the Menu selector to the left or right to select Digital Effect, then press the Menu selector.
6. Move the Menu selector to the left or right to select the desired Digital Effect mode, then press the Menu selector.
7. To exit, press the MENU button. I’m happy to help further over the phone at
https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
I lost my operating manual
Hi,
You can download and print the instruction manual in PDF format by clicking this
link.
Adobe PDF Reader is required to view this manual.
Download Adobe Reader Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.
Thanks for using
FixYa.
My screen suddenly is just white with no picture?
Solution 1 • Unlock focus area selector. • Auto-area AF selected for Custom Setting 2 (AFarea mode): choose another mode. • Press shutter-release button halfway to turn monitor o?¬? or activate exposure meter • Memory card is full, locked, or not inserted. • Flash is charging. • Camera is not in focus. • CPU lens with aperture ring attached without locking aperture at highest f/-number. • Non-CPU lens is attached: rotate camera mode dial to M. • Mode dial rotated to S after shutter speed of bulb selected in mode M: choose new shutter speed • P, S, A, and M modes: lower ?¬? ash. • Digital Vari-Program modes: turn ?¬? ash o?¬? Turn long exposure noise reduction o?¬? Turn long exposure noise reduction o?¬? Press multi selector up or down or rotate sub-command dial to choose photo information displayed Select All for Playback folder. Note that Current will automatically be selected when next photo is taken • Select On for Rotate tall. • Photo was taken with O?¬? selected for Auto image rotation. • Camera orientation was changed while shutter-release button was pressed in continuous shooting mode. • Camera was pointed up or down when photo was taken Use Nikon-approved card. • Card may be damaged. Contact retailer or Nikonauthorized service representative. • Delete unwanted ?¬ les or insert new memory car after removing and replacing the memory card and powering off then back on your cam, you may see how the system now registers your photos will having to click back and forth between AUTO and MAN. I posted very closely related troubleshooting steps to take in order to prevent your CAM from performing badly. Check your CAM batteries to ensure they are using only approved NIKON batteries as anything else will cause you lots of errors and potential problems. When you using the timer or remote options, remember these are controlled by battery as well, radio frequency, and radio wave lengths. When you press the button to take a photo, inspect the button, press firmly for a second and release. If your button is not performing the way it should, inspect it to see if any wear and tear is visible to you. Check free deprey around the button such as DUST, HAIR BUILDUP, and small particals that are hardly visible to the human eye. With very low velocity pressure air, blow around the shoot button as build up will cause the same error your experiencing.
Need software to download on my computer
You will need a 1394 cable (also called a Firewire cable), and you will need a Firewire/1394 capability in your computer. The cable should have a small 4-pin connector on the end that connects into the camera, and a larger 6-pin connector on the end that goes into the computer, although laptops use the 4-pin connector and therefore you need a 4-pin to 4-pin cable.
You can use Movie Maker (comes with Windows) to capture the video, or you can use
Scenalyzer (a shareware program) to capture the video.
My samsung digital camera has block nd never see,,
hi janeth,
Good day!
Kindly check if it still powered ON?check also the battery if still ok?because only with no power you cant see anything in LCD.Seek any person who is familiar with camera opening.
regards,
mastergani
On my samsung sc-d353 mini digital cam, what are
I found both batteries and chargers for this camera by searching Amazon for "Samsung SC-D353 battery".
The coin sized battery will be for memory back-up (keep the date and settings and power the clock).
Pink stripes during playback on
This is usually caused by an oxidized or defective Audio/Video drum. Try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be repaired qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
Why won't my flip out screen work? it worked when
The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to usually be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
What kind of memory card can i use with this that
Download the manual for the Samsung SCD353 here:
http://www.samsung.com/us/support/download/supportDown.do?model_nm=SCD353&mType=UM&vType=L&disp_nm=SCD353
In the English/German version, see page 87. The flash memory used with
this camcorder is the Sony Memory Stick. A Secure Digital (SD) memory
card will not fit and will not work with this camcorder.
Not finding what you are looking for?