Euro-Pro EP91 Quad-Blade Food Processor - Answered Questions & Fixed issues
The lid of my EP91 quad blade is broken
Hi Rosa
Depending on the severity of the broken lid....
I fix a lot of plastic items with either super glue or 2 part epoxy resin.
Then for reinforcement at the edges. I take a 2cm (aprox) piece of thin wire. Like a staple. Then heat it with the soldering iron. sliding back and forth until the wire is embedded into the plastic. even slightly covered over.
This often makes a cracked piece of plastic quite strong.
It may not look great but it might hold you over till you find a replacement
Good Luck
Here are some ideas....
Repairing plastic parts
How to Fix Broken or Cracked Plastic or Weld Plastic
Need a new spindle
You can get replacement parts for the Euro-Pro Quad Blade by calling (800)798-7398.
I need parts
Ok, if you need any parts for your older Euro Pro Processor you can"t get on their Web site . You'll have to call them at -800-798-7398.
I need a Euro-pro Quad
You DON'T want one. I had 2 and they both broke on the first use! Now I can't find the company to get my money back! Horrible product!!!!!!
My europro quad blade model #EP91W seems like it
You can get replacement parts for the Euro-Pro Quad Blade by calling (800)798-7398. I got on line at Euro-Pro.com and sent in a complaint to costumer service about not being able to get a replacement lid for this WONDERFUL food processor. They sent me an order form for all parts on the Euro-Pro Food Processor and an 800 number to call and order the parts. The product is good if you are very gentle with the parts.
12/8/2010 11:48:34 PM •
Euro-Pro EP91...
•
Answered
on Dec 08, 2010
•
1,055 views
Euro-Pro EP91 Quad-Blade 6 Won't Start
My wife was given this unit from an elderly gentleman that was done trying to make it work.
I just fixed the same problem as above. Note - I do not have a manual for this unit.
True above about the bowl cover being locked in position but found the key to make it work is also the white lid to the left of the bowl cover. I was locking and unlocking this white lid with no results. Then I removed the bowl cover and found the white lid cover was loose and easily removed this white lid to inspect inside ( why this cover removes I have no clue).
Anyway I was able to snap the white cover firmly on and turn counter clockwise to lock in place ( six o’clock position), then after putting the bowl cover back on and snapping in place it works.
Note - I do not need to turn the white lid cover to install or remove the clear bowl cover, this could be because it looks like one of the clear tabs might be broken on the locking area of the clear bowl cover. If you have two tabs the same shape on the bowl cover you may need twist the white lid clockwise to install and remove the bowl cover and counter clockwise to lock in place so the unit works, but now that my white lid is snapped firmly in place it hardly moves with the force of both hands trying to turn it.
Hope this helps someone.
Good Luck !
Dan L. P.
Where can I find the bowl and blade.
Look on the floor? It happens, don't laugh. Call the manufacturer or type the manufacturer name and model in the search bar. there should be s service center locator on one of the results you get.
Need the manual
HELLO THERE:
go to the manufactures website and there will be a printable manual there also you can google the make and model of this device and get good results there too ok.
please let me know how this goes for you and dont forget to rate this for me.
best regards
mike
(USN) RETIRED
Missing part
Searched the web all over and finally found an 800 # to call to order parts for the Euro Pro, it's 1-800-798-7398
Thank you for your help.
Not finding what you are looking for?