20 Most Recent
Kenmore Refridgerator Air Flow Diffuser Part W10151374 - Page 9 Questions & Answers
I purchased a use kenmore upright freezer, model#253.28262803.
Was it delivered lying down?
Did you leave it standing upright for 24 hours after delivery?
Yes, after just 4 hours it should have reached 0'F or -18'C. Now you know why they were selling it. You need a service call. My guess is that it had a small leak and it needs topping up with refrigerant gas. Or you could leave it off 24 hours and see if the liquid part of the gas settles?
11/12/2021 5:56:12 PM •
Kenmore...
•
Answered
on Nov 12, 2021
How many cubic feet does Kenmore refrigerator model 1317301WW have?
You model appears to be difficult to find. The Elite is 24.1. I also read it is based on the 3rd and 4th digit on the model number, which would mean yours is 17 cu. ft. You can always do a rough measurement, depth x width x height in feet and rough tenths of a foot.
Kenmore Elite 24.1 cu. ft. Bottom-Freezer Refrigerator
..
10/24/2021 10:18:56 PM •
Kenmore...
•
Answered
on Oct 24, 2021
Compressor Fan on Fridge Quit, Should we Unplug?
109 is not high and if fan wasnt working would be higher it is working as normal when unit running look under at condenser and observe fan --also move unit more away from wall hot air is drawn in from front and exhausted out back
10/18/2021 12:23:56 AM •
Kenmore...
•
Answered
on Oct 18, 2021
Loose door handle on kenmore 106.56536400
wow I can't believe a random post from 2009 would help this poor soul. THANKS! IT WORKED! I had no idea the bottom handle popped off by sliding up! I was so puzzled!
10/6/2021 5:19:06 AM •
Kenmore...
•
Answered
on Oct 06, 2021
Diagnostic mode for kenmore elite refrigerator
Some do have a diagnostic mode and some do not. Each model is different and we really need to have a model# to help troubleshoot any issues. You also did not say what the issue is?
10/1/2021 8:43:17 PM •
Kenmore...
•
Answered
on Oct 01, 2021
Kenmore elite model #253.4451360 flashing error code EF can you tell me the issue the refrigerator will not operate and cool
first disconnect power to the unit. remove the bottom grill and now remove the screw holding the main board and pull the main control board out from under front of refrigerator.. when you have access to the board, reconnect power to the unit. you will need a meter that reads dc voltage to make the following checks. be very careful when making these voltage checks. locate the j2 connection (see picture) and place the leads on j2-3 the brn/wh wire and j2-5 the rd/wh wire. do not disconnect any of the wire connections. there should be 12vdc there. if the voltage is not there, the board # 241511101 will need to be replaced. if the voltage is there, leave the lead on j2-3 and place the other lead on j2-10 the bl/wh wire and it should read from 6 to 12 vdc. if there is no voltage there, again replace the board. if the voltage is at both places, the motor will need to be checked. to access the motor, everything in the freezer will need to be taken out, so the back panel can be removed. first disconnect power to the unit. with the panel out, you will have access to the motor. first check the connections. if they seem ok, reconnect the power and now make the same voltage checks that were made at the board. again do not disconnect any of the wires. all wires must be in place when making these voltage checks. if the voltage is there and it's not running, the motor # 241509402 will need to be replaced
9/20/2021 4:45:13 PM •
Kenmore...
•
Answered
on Sep 20, 2021
Not finding what you are looking for?