20 Most Recent
Ryobi Rht-2660DA Quik Fire Hedge Trimmer 26Cc - Page 4 Questions & Answers
I live in Naracoorte South
are these what your looking for,, Item location:Adelaide, SA, Australia $89.00https://www.ebay.com.au/itm/Ryobi-PLANER-BLADES-318mm-2-Pieces-PTB02PK-Double-Edge-High-Speed-Steel-for-Wood/253294680562?epid=1683394364&hash=item3af98a19f2:g:sDsAAOSwz2tZjTTX
1/4/2022 10:30:24 PM •
Ryobi Garden
•
Answered
on Jan 04, 2022
What fuel line goes where on Ryobi model#990r 4 cycle engine with a Zama carburetor?
Easy way to determine... identify which tube has the filter and connect only that tube to either carb port. Then press the purge bulb several times. If fuel spurts out the other carb port then its correct and simply attach the other tube.
If no fuel spurt, then likely you will see air bubbles in the tank. Switch the line (with filter) to other carb port and press purge several times. If no fuel spurts then some other problem.
Do not use the fuel return without the filter for this procedure as it risks plugging the carburetor with debris from the tank.
10/30/2021 5:56:08 PM •
Ryobi Garden
•
Answered
on Oct 30, 2021
Anyone know the fuel mix ratio for a Ryobi Supreme 720.
I have this machine and it states it requires 4 ounces to 1 gallon gas. This is if you use the i.d.c.oil which is 32:1 it states if other 2 cyc oil is used it requires 6 ounces to 1 gallon fuel. Im trying to add a picture of the machine. I have aryobi 720 sieries. The newer ryobi machines call for the 50:1.
8/15/2021 1:48:33 AM •
Ryobi Garden
•
Answered
on Aug 15, 2021
Bought new carburetor off eBay put on won't even try to start pour little sea foam get to run on full choke flip it off dies try adj but no luck and pre settings to get to run
Typical small engine carburetor initial setting is 1.5 turns for both high and low needles. Turn in the idle speed adjust to open the throttle for easier start and run until the low speed air fuel mix is better adjusted. If you treated the fuel with Seafoam do not overdose or guess. Seafoam has a significantly higher specific gravity making it more difficult to draw up for atomization. Better to use untreated fuel until carb adjust is completed.If it runs for awhile with choke then likely the impulse fuel pump is working so the carb gasket orientation is correct but double check the impulse air passage is aligned.It's always a good idea to replace the fuel filter and fuel lines. Be careful to not get the filtered fuel line wrong or any debris in the tank may be drawn into the carb and plug the internal fuel screen. Telltale for a plugged screen is the purge bulb is difficult to depress and rises extremely slow.
8/1/2021 4:01:40 AM •
Ryobi Garden
•
Answered
on Aug 01, 2021
Not finding what you are looking for?