My printer wont print at all it doesnt even with the icon that it is printing. All it showing is a error message that something is wrong with the current printer setup. The only thing i see wrong is that it is showing idle. .... How do i fix that??? its a hp laserjet 1020.
Hello,
I believe the printer is connected via USB.
Check in device manager if the LJ 1020 printer is listed.
If yes, go to the driver properties > ports tab and Select the appropriate port for the printer
Alternatively, uninstall the full software and reinstall it again from
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=439320&
- Nikhil
Posted on Nov 21, 2008
the hp laserjet 1020 the front cover door open or the toner cartridge is missing
Open The printer Side Cover. Then Remove Back Plate Of Printer There is Senser On Back Side Check They Are moving or not there is spring in senser
Posted on Feb 07, 2011
I want the software tool to reset the waste ink level for canon ip-1000 inkjet printer
want the software tool to reset the waste ink level for canon inkjet printers
Posted on Nov 18, 2008
I have a 1020 hp laser printer that I want to use with my macbook pro. I have heard that I can download a driver to do this so the printer will work with the macbook.
In some of the forums they say you can do this.
Please give me exact directions on how to do this
Iwant driver for my new PC.
try this,
Posted on Jan 29, 2008
Is it possible to make the printer print a test print or diagnostics page by pressing buttons? I.e., all by itself without a printer driver application on the PC? My problem is that I run the printer under linux with CUPS, hpijs, hplip. All worked great until I upgraded lots of packages on the debian installation. For several weeks I could not print, until I figured out how the udev rules file changed format with the new udev version, and so on. Now one of the printers (two are hooked up) pretty much prints as before, but not the 1020. It does feed a sheet of paper, but nothing is printed. I noticed a little smoke coming out of the paper output opening before the first sheet after several weeks came out. Could that mean that the printer is actually broken? All other printers I've used in the past many years all had a way of printing a test sheet autonomously. Some printers had a special button. Most other printers had a special startup sequence. Press and hold button X while turning power on, something like that. The user manual of this printer only mentions clicking a button in the Windows printer driver, which I don't use because of linux. I remember having had trouble of installing the windows printer driver under WinXP. Anyway, perhaps there still is a way to get a test print without printer driver, just to verify that the problem is in the printer and not in the linux software. Thanks for your answer.
Pull up the top cover and down it three times.
Posted on Aug 01, 2010
Paper feeds through printer and paper is blank. Changed toner and rebooted everything and still not printing. Why?
this is a usual problem with the early models of printers. if you go onto control panel and then printers for the properties then print test page. if this prints fine then you will have to use the add/remove programmes to remove printer software. then delete the printer and install again but not from disc as windows has a package which will do it for you. leave disc in drawer and dont run. just search for the drive whilst installing printer. if this doesnt solve your problem then use the software which you will have to install again. if this doesnt occur then take cartridges out and check if they are correct ones or compatibles as hp not too compatible friendly due to counters.
Posted on Feb 25, 2009
Dear Shah,
could you please tell me the process of refilling tonner in HP Q2612A print cartridge?
Regards,
Manoj
09739418654
check this link...
http://www.futuregraphicsllc.com/lit/tg/hp1012.pdf
Posted on Jun 02, 2008
sir, i have a hp 1022 laser printer,my problem is that when i am taking printout on legal paper and the matter is best fitted in legal size,but it prints the matter leaving about 3.5 - 4 inches from the top means it is leaving the matter form the top.i also want to tell you that i also have an hp 6L laser printer and the same printout haveing the same paper size i am getting the good printout. so,sir if you kindley suggest me about the setting for that or some other thing at the earliest i will be highley obeliged. Thankyou
Hi, Laserjet 1022 printe supports printing through the Laserjet 6L drivers and its tested, please select the same USB port for the Laserjet 1022 printer which is selected for the Laserjet 6L printer and then try printing. Ragards, MukeshS
Posted on Feb 12, 2007
We need the drivers of HP laserjet 1020 printer
I loss the drivers of HP LaserJet 1020 printer. I need now. Please help me.
Posted on Oct 29, 2008
how to print selftest page on laserjet 1020 without pc
sorry no opption this prntr
Posted on Sep 15, 2010
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions