20 Most Recent Neff B1691 Single circotherm super Stainless Steel Electric Oven - Page 7 Questions & Answers

there are many de-greasers out there, or even lemon juice if you want a natural, food-safe chemical-free option.... for particularly bad build-up you could use paint stripper which is fine to use on enamel. good old fashioned elbow grease with a scourer and strong solution of washing-up liquid will do it, but be patient.

https://www.northlondonappliancerepairs.co.uk/error-codes/neff-error-codes.html

Get new light housing and fit, Not very expensive. I can get for you if required.

Yes two red flecked on same terminal and the black flecked on the other side terminal of the element. Bobs your Uncle......HEAT! Make sure they are a tight fit. New spades if required.

Hi This will be an element replace. I can do for you if required depending where you reside. I cover every Midlands postcode, Coventry Walsall and surrounding areas . David on 078123047557

You have a protruding connection. Check what the panel is touching when you are replacing it.

The breaker could be changed from 30a to 20a. A 30amp breaker will run the unit but you will have less/no protection since the oven will pull 10 extra amps before it trips which could totally fry your oven depending on the failure. Re-check the wording to see if it says 'minimum' 20amp breaker or if it indicates 20amp breaker only. If it's minimum 20amp I'd run it. If it says 20amp only, I'd change the breaker. The existing wiring and outlet will be OK, if the plug-in is the same. Get an electrician to change the breaker. You should really know what you are doing before you try it yourself.