20 Most Recent Neff U1661 Double circotherm super Electric Oven - Page 4 Questions & Answers

0helpful
1answer

TOC

hi there if your toc is at fault you will have no oven function at all ie. fan, light, and timer display. i would first check your timer is not set to auto and is also got the time set, failing that your thermostat may be at fault.
5/25/2008 9:12:19 AM • Neff U1661... • Answered on May 25, 2008
0helpful
1answer

Cannot re-fit middle glasss into main oven door

this is a new one too me but ill give a shot
ive never seen an over where the supports were all intack
they should be screwed in at least to of them by what i call the hidden screw or plug either the 2 bottom come out or the 2 top ones come out to where the glass slides into position and just put the supports back into place
i was reading reviews on this particular item and clearly by what there describing this is not a very good functioning machine all out of tune from the older style
5/9/2008 6:28:56 PM • Neff U1661... • Answered on May 09, 2008
0helpful
1answer

How can I replace a damaged timer control knob?

i was reading up on this item and i came across section where they mentioned you have to purchase 4 complete different replacement knob boxes or panels

heres the link boy this product is having one heck of time

http://www.reviewcentre.com/reviews105062.html
5/9/2008 12:55:37 PM • Neff U1661... • Answered on May 09, 2008
0helpful
1answer

CHILDLOCK DOES NOT UNLOCK

all nobs and controls have to be off before the lock can be disengaged and the new knobs might have broken there pins somewhere inside a knob so its kinda permanently locked till the knob can be fixed saftey features

what ever happened to the sliding lock bar in the ovens
5/9/2008 7:36:38 AM • Neff U1661... • Answered on May 09, 2008
0helpful
1answer

Clouding of upper oven door

yes the seals have gone ka-pute
this equipment looks good but falls apart faster than our older models when we all were growing up
http://www.reviewcentre.com/reviews105062.html
5/9/2008 7:34:06 AM • Neff U1661... • Answered on May 09, 2008
0helpful
1answer

No heat in the main oven

Hi

We had the same problem - turned out to be the fan oven element - simple to fit - remove the back plate around the fan (6 screws) to expose the element. Remove screws securing element and disconnect wires (mark wires before removing) Our replacement was £40, but take the original as there are quite a few variants - you will also need the full ENR number (on side of housing) However, be aware that if this does not work, the thermostat may also have blown with the element. We were lucky as replacing the elelment fixed the problem.
5/9/2008 5:37:29 AM • Neff U1661... • Answered on May 09, 2008
0helpful
1answer

Change Bulbs in Neff U1661 Oven

You don't need to slide the oven out, just remove the glass covers with a flat bladed screwdriver and then unscrew the old bulbs. Replacement is the opposite.
Bulbs available from Homebase, Wickes, BandQ etc etc.
5/8/2008 1:57:12 PM • Neff U1661... • Answered on May 08, 2008
0helpful
1answer

Neff U1422 oven grill tripping RCD

The grill element has an internal short and needs replacing. Sometimes you can see it as a slight bulging of the element. This happens just before it blows a hole. It may also have been physically damaged when something was put in there after a few Sherries. :>D Sounds like your RCD is adequately sensitive.
1/2/2024 7:05:55 PM • Neff Ovens • Answered on Jan 02, 2024
0helpful
1answer

Problems with touch keys on Neff B2ACH7HH0B Oven

See Troubleshooting section of manual on page 25. It may help untitled (neff-international.com)
11/8/2023 12:11:05 PM • Neff Ovens • Answered on Nov 08, 2023
0helpful
1answer

Removing Oven element on a NEFF 1031-SP oven ( E-Nr B1120F1GB/01)

Check out this video on replaceing a element on a Neff. https://www.youtube.com/watch?v=YXMBwx3X74E Best to you.
8/26/2023 10:39:57 AM • Neff Ovens • Answered on Aug 26, 2023
0helpful
1answer
0helpful
1answer

Neff Steam Oven error code E5123.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiwgLHn8vL-AhURAzQIHRE9BqIQFnoECBsQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29925510-neff_steam_over_error_code_e5123&usg=AOvVaw1yI-sjEM1vvRntCUJzF6u2
5/13/2023 6:13:47 PM • Neff Ovens • Answered on May 13, 2023
0helpful
1answer

Neff T18FD36X0/01 display flickering,not staying on.

If the display on your Neff T18FD36X0/01 appliance is flickering and not staying on, there could be a problem with the control board or the display module itself. Here are some steps you can take to troubleshoot the issue:
  1. Check the power supply: Make sure that the appliance is getting power by checking the outlet and the power cord. You can also try plugging in another appliance to see if the outlet is working properly.
  2. Check the control board: If the power supply is fine, the next step is to check the control board. Turn off the power to the appliance and remove the control panel cover to access the control board. Look for any loose wires, damaged connectors or burnt components. If you find any issues, you may need to replace the control board.
  3. Check the display module: If the control board is fine, the issue may be with the display module itself. Remove the control panel cover and locate the display module. Check the connections and make sure they are secure. If the connections are fine, the display module may need to be replaced.
  4. Call a professional: If you are not comfortable troubleshooting or repairing the appliance yourself, it is best to call a professional technician. They will be able to diagnose the issue and recommend the best course of action.
Remember to always turn off the power to the appliance before attempting any repairs or troubleshooting. Safety should be your top priority.
2/26/2023 2:10:59 PM • Neff Ovens • Answered on Feb 26, 2023
0helpful
1answer

I can't remove the light bulb cover of my neff oven to change the bulb

A length of wood such as a dowel can be used with a mallet or small hammer. Place one end of the wood against the lamp cover so as to force it anti clockwise. Tap the other end gently.
1/21/2023 1:09:13 PM • Neff Ovens • Answered on Jan 21, 2023
0helpful
1answer
0helpful
1answer

My neff ovens fan is coming on but the oven is overheating

Check/replace the thermostat.
2/28/2022 12:54:15 PM • Neff Ovens • Answered on Feb 28, 2022
0helpful
1answer

Cause of Neff Induction Hob Error d4?

I can only confirm that the is no D4 Error shown anywhere. If Neff, the maker can't tell you what the error is, then surely no-one can. Very poor show. I think I would be cutting my losses and go back to a traditional cooktop from a different maker and pursue a legal case against Neff. They should change their name to 'Naff'. NEFF appliances are among the most durable and reliable kitchen devices on the UK market. But every once in a while, a NEFF appliance will throw an error code for you to deal with. When a fault code is displayed on your NEFF appliance, it indicates a problem, but not what that problem is or what has caused it. An appliance fault code simply detects and indicates the nature of the issue and provides the general area where investigations need to be carried out. Bear in mind that on many occasions, your NEFF appliance will be in need of professional repair from a certified electrician to get guaranteed results. So, if :
  • You have a problem with your NEFF appliance
  • You want to know what a specific error code means
  • You want to trace and correct faults in your NEFF appliance
Then, read on. NEFF appliances fault codes and their importance Your NEFF appliance will indicate an error code if it has a problem. This will be shown on the digital display and will be a single letter followed by one or two numbers. You can use this appliance error code to help identify where the problem is occurring. The most common appliance fault codes are related to defective oven elements, drainage issues on washing machines, and blocked pumps in dishwashers. A detailed look at NEFF appliance error codes

NEFF induction hob error codes The most common faults of a NEFF induction hob are:
  • The hob not starting up;
  • The hob shutting off during cooking;
  • The hob flashing after finishing cooking;
  • The hob making a noise;
  • Food isn't cooking evenly.
NEFF induction hob error codes that may help you locate the source of the problem are shown here:
  • F1 - Tnsuitable cookware is being used, or there's no cookware in the zone;
  • F2/F02/F4/F04- Tour appliance hasn't cooled down completely;
  • F8/F08 - If your hob has been working on high power for a long time, the timeout will activate;
  • E9 - There's an internal fault with your appliance electronics.
Bear in mind that most of the issues will require a certifed induction hob engineer to complete the job and fix your NEFF appliance.
2/3/2022 5:01:09 PM • Neff Ovens • Answered on Feb 03, 2022
Not finding what you are looking for?
Neff U1661 Double circotherm super Electric Oven Logo

102 questions posted

Ask a Question

Usually answered in minutes!

Top Neff Ovens Experts

Paul Carew

Level 3 Expert

3808 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

john h

Level 3 Expert

29494 Answers

Are you a Neff Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neff Ovens

  • Neff Ovens

Most Popular Question

neff oven u1661 shows fault code 5

  • Ovens
Loading...