20 Most Recent
Generac 6051 Guardian Series Air-Cooled 10kW 120/240V Single Phase Steel Residential Generator with Nexus Smart Switch - Page 8 Questions & Answers
Model 55010. Why doesn't it crank sometimes?
If you replaced starter and it does not crank at times, then perhaps the new starter has bad spot on commutator and when the motor comes to rest on one of those areas the brushes do not transmit power to the motor. Those rings should be squeaky clean.
Then check for a bad or intermittent connection not allowing motor to get electricity. Next time it does not crank check to see if you have voltage at motor.
8/30/2015 11:00:37 AM •
Generac...
•
Answered
on Aug 30, 2015
Trying to find oil filter that can be found locally from car part supply store.
take the old filter along to the spares shop and see if they can match it up
I suspect that the same filter will fit both engines
if you want to get technical, use a verniers to measure the thread hole diameter, a thread gauge to get the thread pitch, and the outside diameter of the oil seal
by going to oil filters manufacturers on line and researching their catalogues you will find pages of filters with dimensions that will match you filter
I would rather just go and buy a genuine filter from a mower shop or kohler dealer as there may be a generic filter already listed.
5/5/2015 5:37:16 AM •
Generac...
•
Answered
on May 05, 2015
Generac ix 2000 mod 0057932 start up ok but then stops running
Possibly blockage in fuel tank or line to carburetor? Fuel filter?
Fuel turn off valve? Generator malfunction that pulls the kill switch?
Owner's manual trouble shooting?
No manual try for owners and repair manual http://www.manualslib.com/
3/17/2015 5:04:29 PM •
Generac...
•
Answered
on Mar 17, 2015
Not finding what you are looking for?