20 Most Recent Lexmark X4270 All-In-One InkJet Printer Questions & Answers

Does your old equipment have a different operating system? If it does, you need to get the driver for your new system.

Try this page.

I know your problem. I just put in new cartridges and it will print the test page, but nothing else. Did you get an answer

you can get your drivers here:
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

Try checking the ink cartridges and make sure they have ink in them or it will keep printing blank pages. Then try printing a test page by going to control panel, clicking on printers and faxes and right clicking on your printer and going to properties. Then go all the way down to the bottom of the page and click print test page. It will clean the printer cartridges and align them to print correctly. It should work after that.

typically faxing doesn't work on VOIP. i tried many times and sometimes it would go through although it said it didn't. other times it didn't work at all. VOIP has a limited bandwidth and the fax needs to send more info over the line than VOIP makes room for.

to have the best luck, stop all downloads and other network traffic while attempting to fax, so that there are no other programs or devices using the internet. the fax will have its best chance of working that way, although it probably still won't

here are some very good tips as well:
http://chris.pirillo.com/how-to-fax-over-voip-on-the-internet/

To download the manual for Lexmark X4270, please click the link below:

Lexmark X4270 Manual

Thank you

Here is the link to Lexmark's website for this printer.

http://www.lexmark.com/publications/pdfs/2007/4200/en.html

Don

I would look for a dusty LED or sensor. They're used to let the printhead to find its position. Once cleaned the head should align properly.

not sure if this link will help you out but have a look. Lexmark x4270 not printing Google Search

you should buy a new printer

Try to clear the memory of the or the printer is in fax mode please choose copy or scan mode

You may be out of ink, or communications between the computer and printer could be malfunctioning.