20 Most Recent ASUS WIRELESS ROUTER |WL-520G - RT (WL520G) - Page 5 Questions & Answers

This -->LINK<-- is to the ASUS software dowload site for the WL-520gC.

Regards

Philip

I am buying the ASUS 4G machine and have a USB router connecting to Vodaphone through the molbile network. Without installing Windows XP can I connect the wireless modem to the little computer. Cheers Nick W

Reset the router to factory settings. There should be a reset button the back; unplug it, hold that down for a minute, then plug back in and follow the original directions to get to the administrative site.

hello!

-- can you get online if you connect your computer directly to your modem?
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

You need to enter the Router's Menu. Its web Based you can type http://192.168.1.1 from your web browser to get into your Router's Menu. It might come up with Username and password request put "admin" for both of them (its default).Since the Menu is very easy to understand you will find all settings including security that you needed. Make sure your laptop had DHCP enabled and Router connected to computer.

Good Luck

It is not hard at all, but its alot of typing.

First have you tried following the manual to set it up?

With this particular router you will need to treat the port range field as the port field. You will just have to forward single ports at a time. Which will be fine. In case you need more reference see the link below.

http://www.portforward.com/english/routers/port_forwarding/Asus/WL-520G/WL-520Gindex.htm

Hope this helps!

You don't need to install your router. it simply connects via ethernet cable or wireless.

Try to check the cable Sir..

Here's the manuals for your router, you can find instructions in the Quick Guides in there:

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=WL-520g


Here's a direct link to the quick guide manual, there's a lot of non-english versions on that site and it's a bit confusing to find the right file:

http://dlsvr03.asus.com/pub/ASUS/wireless/WL-520g/WL520gQSG_2598.zip

I suspect these devices by default may be set to either the same IP address or exist on the same subnet. If you know how to configure the devices you can check. Possibly you can connect a computer to each (when not router and modem are not connected to each other) and issue use the open the DOS or command prompt type ipconfig and press enter to get the default gateway address for each device and report the contents back here. Otherwise you may need someone to lead you through those checks and reconfigure the devices as appropriate.

As a new owner of a wireless router you may also want to consider this as you are installing it.

for general wireless security see

http://www.fixya.com/support/t281214-wir...

Hi Again

Answer is simple; network security (WEP or WPA) key is different than regular password. Entry should be Hexadecimal, However you can use pass phrase generator by entering regular characters or you can enter directly. For example if you we want to put to "password" as network key hexadecimal input will be exactly 2B204A3F1042643E480FDD655E for 128 Bit WEP. Since you are unable to reach the router. Please reset it first. so it will be accessible from your computer without Network key. Network key will be enough for the 1st line
Hope you will resolve the issue.

Good Luck

The default IP address is 192.168.1.1
The manual is here:
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=WL-520gC
Have you used the setup CD?

To enable WEP encryption requires configuration changes in two places the router (WL-520G) and for the network adapter on the associated with the computer expecting to use the wireless router. Do you both believe you made the appropriate changes to both devices required? The router and the computer

Another possible issue is either the router or the network adapter do not support WEP meaning the option is not possible at all.

you must need to put in more than the ppoe connection type, there is the vpi =0, vci =38, then input your isp's username and password to get a connection.

 

All this must be done via the RJ45 cable and making sure that the pc's lan card is set to obtain an ip address automatically.

 

To get into the routers settings, type into your web browser either 192.168.0.1 or 192.168.0.100, as i'm not sure that actuall routers address, sometims it's on the underneath or refer to the manual.

YES> If you will install a router into your network, it will share the internet conenction among the two computers. Both wireless and wired. So the connection will be from

Modem ----> Router (wireless/wired capable)   ------> PCs (two Pcs both the desktop and the laptop

 

and you can also add up another PC if you want to.

you have changed the network key, but why update the username and password as it should always be the same which is the one supplied to you to connect to your service providers connection, assuming you mean the security key, go to your pc and search for your network again, as it will be trying to connect to a non existant unsecured router. When it searches and finds the networks in your area, choose yours click connect and the enter password window should pop up to be entered. Go to your browser and clear old temp files and cookies in tools, internet options, restart pc and you should assuming you have put the correct settings in be online.

Well since ur second computer goes online with wireless connection, so it seems the problem with your first computer.The only thing that you have to do is to update your wireless card drivers. Detailed answer: 1. Restart your computer in safe mode with networking mode. 2. Uninstall the wireless card. 3. Restart the computer and install the card again. This will definitely resolve your problem. Goodluck. ( Got the solution from ***)

You can download the service manual from following link ASUS 22T1EH MONITOR-TV SM Service Manual download, schematics, eeprom, repair info for electronics experts (elektrotanya.com)

Probably corrupt DLL files, maybe due to incorrect decompression or dirty CD.