Zeiss CARL Visucam PRO NM Fundus Camera - Page 2 - Answered Questions & Fixed issues


Hygiene and cleanliness is paramount. Sterilise everything first!

Science &... | Answered on Jan 31, 2019 | 121 views


They make test strips.

Science &... | Answered on Jan 31, 2019 | 417 views


Manuals are available from PHC. Email service@us.phchd.com or call Technical Support at 800-858-8442 ext. 48299

Science &... | Answered on Jan 22, 2019 | 123 views


As water freezes the molecules it is made from become a rigid framework. Think of it like scaffolding poles. they take up a lot less space when the are all in a pile but they take up a lot more space when you bolt them together.

Science &... | Answered on Jan 17, 2019 | 139 views


Hello, Debra -

Apparently the company Education Insights sells the GeoSafari Talking Microscope.

If you have not already done so, I suggest you contact Education Insights Customer Service and ask about the availability of the slides you need.

You can find the Customer Service toll free phone number and email address here:
https://www.educationalinsights.com/category/customer+service.do

Best wishes.

Science &... | Answered on Dec 04, 2018 | 202 views


About Fixya Fixya is a community based troubleshooting resource that provides consumer generated, practical product tips to help consumers get answers on over 19 million products. Fixya is a place where individuals can share real world experiences and connect to provide each other practical advice.
From fixing cars, to cameras, to mobile devices, Fixya empowers over 30 million monthly visitors to repair and improve upon products they already own via its website and on mobile devices around the globe.

Science &... | Answered on Nov 01, 2018 | 281 views


George tang ,,,, here is drive.. follow the link
download and run in your system
with regards
it will look like so

Aigo GE-5 Driver Created by Olli Niemitalo on 2014-01-31, last modified 2014-01-31
I bought an Aigo GE-5 microscope years ago. If someone needs, here is the driver for it.
GE5-mikroskooppi.zip
Thanks to Pauli for salvaging this from the CD my CD drive could no longer read.


http://yehar.com/blog/?p=3468

Science &... | Answered on Jun 23, 2018 | 912 views


Request the service manual directly from Abbott.

Science &... | Answered on Jan 03, 2019 | 876 views


But a new scope. Having the crosshair reseated will cost you more than getting a new BSA scope.

Science &... | Answered on Apr 03, 2018 | 565 views


Manuals are available from PHC. Email service@us.phchd.com or call Technical Support at 800-858-8442 ext. 48299.

Science &... | Answered on Apr 03, 2018 | 614 views


Check the fuses located on both sides of the mains connection in the back of the autoclave. One of them has blown. If both check ok, then check the connection tho the mains. You may have a faulty ground. If you are not comfortable doing this, contact Eschmann at tel:+44 (0)1903 753322
Fax: +44 (0)1903 875789
info@eschmann.co.uk

Science &... | Answered on Apr 03, 2018 | 581 views


Choosing the right laboratory for conducting various tests and analyses can be a tricky affair. If there is any discrepancy in readings, it can be cause quote a stir. Thus, it is imperative that the staff operating the equipment of the laboratory must be expertly trained. The equipment itself must be top notch in quality. LiveScanLabs has managed to meet all this criteria. They have centers in Hialeah, Hollywood, Fort Lauderdale, Pembroke Park and Pembroke Pines. They conduct Fingerprint Analysis, Fingerprint Testing, **** Analysis, **** Testing, DNA Analysis, DNA Testing and regular health tests as well. Visit their website at www.livescanlabs.com.

Science &... | Answered on Mar 03, 2018 | 481 views


Are you sure that the lid safety interlock switch isn't damaged/dirty? If the centrifuge can't detect that the lid is closed it will never start. Sometime it just needs an extra push down on the lid.

Science &... | Answered on Jan 17, 2018 | 1,500 views


It sounds like either the bulb is loose or the connection between the bulb socket and a wire is loose. To check both, Loosen the screw knob on the underside of microscope and open the panel to expose the bulb. Use a small screwdriver to loosen the screws holding (the two screws closest to the bulb) the prongs of the halogen bulb. Note that the prongs of the bulb are held in place by small brass plates which shift slightly when the screws are loosened. Remove the old bulb. Important: Do not touch the new halogen bulb with bare hands. Wear gloves or hold the bulb using tissue or lens paper. Body oils may damage the halogen bulb. Insert prongs of replacement bulb into top of socket (above the brass plate) and tighten screws slightly. (The brass plates will move up to hold the prongs in place.) Close door and hand tighten the thumbscrew knob.
If this does not work, contact Premier for assistance: Premiere® Microscope Service, 7241 Gabe Court, Manassas, VA 20109 (703) 330-1413

Science &... | Answered on Jan 15, 2018 | 529 views


The error E61 indicates that your water pump has failed or is not active. You should check the pump and replace it if needed. You should also check the steam generator sensor and replace it if needed.

For more information, contact Euronda at Water inlet pump inactive or call (+39) 0445 329811 (Vicenza, Italy)

Science &... | Answered on Jan 15, 2018 | 489 views

Not finding what you are looking for?
Zeiss CARL Visucam PRO NM Fundus Camera Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Zeiss Science & Laboratory Experts

Gep Pep

Level 2 Expert

54 Answers

 Brian Main
Brian Main

Level 3 Expert

469 Answers

Terry
Terry

Level 3 Expert

10625 Answers

Are you a Zeiss Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...