Zeiss CARL Visucam PRO NM Fundus Camera - Answered Questions & Fixed issues


This is a brand name, not a specific device and model. That said, here is a page describing mode switch in the setup screen using the touch screen for a specific device. I assume a touch screen would have an icon for turning a device off.
Zeiss HUMPHREY 720i User Manual System Setup

Zeiss Science &... | Answered on Jun 16, 2018 | 656 views


The battery is soldered to the CPU. People from Zeiss Germany said that it needs to replace all the CPU. Now a days there is no longer spare parts for that instrument. I recommen you just change the day and time each time you turn it on

Zeiss Science &... | Answered on Jan 05, 2017 | 1,766 views


Unfortunatly you should contact Zeiss representative for load again the completecomplete Visucam programprogram.

Zeiss Science &... | Answered on Oct 01, 2014 | 522 views


This is very funny. I was just looking to find a similar solution for my laboval. Haven't measured it yet, but it keeps blowing the light bulbs. Do you run it at 110 or 220V?

Zeiss Science &... | Answered on May 19, 2013 | 760 views


That is an autoclave and peoples life and health depend on it. Please contact the manufacturer at +39 0445 329811

Science &... | Answered on Sep 27, 2019 | 71 views


1. Always clean the slide. 2.Make sure that the fine and the coarse adjustment knobs do not scratch the slide by handling them gently.

Science &... | Answered on Sep 05, 2019 | 75 views


Turn it on and bring up the temperature. The pressure inside will increase as the temperature increases.

Science &... | Answered on Aug 19, 2019 | 117 views


The fault table is on page 15 of the following document.

http://frankshospitalworkshop.com/equipment/documents/autoclaves/service_manuals/Eschmann_SES2000_-_Service_Manual.pdf

Further support may be channeled through the distributor. As with many devices, it is suggested to have mainteance and repair done by personnel trained specifically in such for the devices. There is quite a bit of information in this manual one might wade through Page 28 lists error codes and error 2 listed refers to door open during cycle.

UK Customers Eschmann Equipment, Peter Road, Lancing, West Sussex BN15 8TJ, England. Tel: +44 (0) 1903 765040. Fax: +44 (0) 1903 875711. Overseas Customers Contact your local distributor. In case of doubt contact Eschmann Equipment.

Science &... | Answered on Jun 19, 2019 | 96 views


Each letter refers to a cardinal direction North West East South, so press n e w n e w s.

Science &... | Answered on May 18, 2019 | 2,735 views


A User Manual for the Variscope Binocular 40x to 1000x microscopes is available from Amazon online:
http://www.manuallibrary.net/1475-40x-1000x-biological-binocular-user-manual.html

Science &... | Answered on May 19, 2019 | 293 views


Manuals are available from PHC. Email service@us.phchd.com or call Technical Support at 800-858-8442 ext. 48299.

Science &... | Answered on May 18, 2019 | 595 views


Try here:
https://www.optiboard.com/forums/showthread.php/8260-Lensometer

Science &... | Answered on Apr 26, 2019 | 95 views


Contact Zeiss for service.

Science &... | Answered on Apr 19, 2019 | 604 views


You have a microscope with a camera in or on it? And the cord goes to a tablet computer? And "pulled up codes to download" means whet? "Pulled up"? "codes"? Did you "download"?
Most operating systems will use a graphics program to accept an image from a TWAIN device like a camera or a scanner. Perhaps you could use something like that.
I have used some different programs with cameras and scanners under Windows long ago (XP and Vista).

Science &... | Answered on Apr 18, 2019 | 170 views


Without a brand name and model number or any pictures, it is not possible to guess what you have, where the light is, what wires or switches might be on it.
Sometimes it is just a simple tightening of the bulb or cleaning of battery contacts to get it fixed.

Science &... | Answered on Apr 18, 2019 | 73 views


GIVE YOU 1 GUESS IF YOU HAVE TO ASK HERE IT IS NOT YOU

Science &... | Answered on Mar 02, 2019 | 90 views


Fun fact. Uranus could have been called Georgium Sidus in honor of King George III. Or Herschel in honor of planet's discoverer. But finally was chosen Uranus because since Saturn was Jupiter's father, the new planet should be named after Saturn's father. More useful information about this planet you can find here https://solarstory.net/planets/uranus

Science &... | Answered on Feb 01, 2019 | 177 views


Autoclave tomy SX-500 Show" e23 " How to fix?
gmantech2018@gmail.com

Science &... | Answered on Feb 01, 2019 | 664 views

Not finding what you are looking for?
Zeiss CARL Visucam PRO NM Fundus Camera Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Zeiss Science & Laboratory Experts

Gep Pep

Level 2 Expert

54 Answers

 Brian Main
Brian Main

Level 3 Expert

469 Answers

Terry
Terry

Level 3 Expert

10482 Answers

Are you a Zeiss Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...