20 Most Recent Xerox WorkCentre 7228 7235 7245 7328 7335 7345 Fuser Cartridge 008R13028 Questions & Answers

You can't reset the drums counter on the machine. The drum has what they call a CRUM on it. It's the micro chip on the drum frame. You can buy new CRUM's or use one that still has some life on it. Press the two plastic retainers to remove the CRUM.

Hello, Go to this website for help with this error code: WorkCentre 7328 7335 7345 7346 Support Drivers

009-330 error code xerox work center 7345 problom & soluson

010-353 error

how to solve 004.346 in 7228

009-936 error

• Check that the paper size setting is correct
• Check the switch actuators on Tray 3, for wear or damage. Repair or replace as required
• Check the Tray 3 Paper Size Sensor for damage or incorrect mounting

I install xerox new machine when turn on gives error code 123-333

If the toner rubs off the page after it comes out of the printer the fuser is bad. Fuser wires get very hot, so if the page isn't slightly warm, thats a good indicator of a worn fuser wire