20 Most Recent Toshiba satellite c660 - Page 6 Questions & Answers

check all power and data leads from motherboard to hard drive and all of your cd/dvd drives make sure connections are secure dust free and not faulty computers need all power and data to travel through every working device and to finish its cycle so any faulty lead will end in computer error or shutdown or fail to boot make sure your computers RAM modules are securely seated with no dust in the sockets also the Cmos battery has charge and seated with no dust in the sockets some motherboards cmos batteries are soldered in might be getting hot check your CPU make sure it has a thermal paste and a dust free and secure seating could be a memory dump you might be running to many programs at the one time placing to much strain on the CPU you might not have enough RAM random access memory hope it helps

Toshiba Satellite C660 User Guide Download Here

Self check: Do you see the BIOS or CMOS flash screen. If so BIOS or CMOS is not corrupted.One of these below would be the problem:1. check your battery status, there might be problem with the battery, try changing the Laptop battery. 2. The Bios or CMOS might be corrupted. If so you should hot flash the BIOS or CMOS. (Hot flashing is getting the BIOS or CMOS executible from your laptop manufacturer website into USB pen drive and booting it from it to repair or reinstall or reflash the BIOS or CMOS)3. There might be problem with your laptop screen.4. There might be problem in the graphics chip.Suggested solutions:Check all of the suggested problems, if the problem is 3 & 4 you should take it to the repair technician to replace it with the new screen or graphics chip.Regards-Dileep

Lost windows password?Do you have another valid administrator account which can normally log on? If so, you can log on as the administrator to change the account you forgotten.Or,you can think about the Windows Password Reset , it is very usefull and convenient.

Hi There,There are currently no easy ways to update a bios through linux at all - including live cd's. Your best bet is to make a bios update USB stick (or floppy depending on the age of the computer)Here's a link to those instructions:http://www.biosflash.com/e/bios-boot-usb-stick.htmAlternatively, speaking from my own experience with a similar situation, you can take the hard drive out, use it in place of the usb stick, boot from it, update your bios, and go from there.

it sounds like you have some corrupted drivers, load into safe mode with networking by pressing f8 after power on. uninstall all pointing device drivers via control panel. install the correct drivers from the toshiba website If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

run the chkdsk utiltyclick start type cmd press enter you should see a black screen dos modetype in chkdsk/f/r press enter this will schedule to occur on restarthave no input while the chkdsk utility is in progress any input might further damage your computer and its operating systemthen try the update againhope it helps

Try booting in safe mode and see if the keyboard is locked. Maybe the keyboard is bad.Turn off the computer, then hit the power button to turn itback on and immediately start hitting the F8 key repeatedly until you see SAFEMODE. Take the Safe Mode option and let it boot up. Safe Mode will lookdifferent to you, the screen will be darker and the icons bigger, this isnormal.

Update your drivers on the Toshiba website by CLICKING HERE

Go to device manager and check the list until you find microphone, click on left box, and right click on the contents, look for the word disable and click on it to deactivate the microphone.

Maybe the hard drive is bad. Does it seem like the drive is spinning? Are you able to boot all the way?Most times if there is a problem with the hard drive the system will display a message on the screen.Maybe the light for the drive is just out.If you are able to boot up and function, don't worry about it.

The lid has to come off. Make sure you remove the strip that is right above the keyboard so that you can get to the screws that hold the lcd in place. Also remove the screws on the bottom of the laptop that are right under the lcd screen. Sometimes there are screws on the back side of the lcd screen that have to be removed.

Go to www.acebyteutilities.com this is a free software, loaded with all kinds of tools that will help speed up your computer.

Sound like the LCD screen's inverter is causing an short/overload and the power adapter is shutting down (thermal cutout).Remove the LCD screen and connect an external monitor, power up the external monitor first and the boot up the laptop. The video should automatically on the external monitor. If the display on the external monitor is OK then the fault could be the inverter which is located at the bottom of the LCD screen between the hinges.LCD screens and Inverters for your laptop maybe available from this WEB site.www.lcdparts.net